SA-NS510 - Sony Audio Service Manual (repair manual). Page 4

ABOUT  THE  SETTING  METHOD  OF  WIRELESS  LAN
When setting the wireless LAN by operation check, set the wire-
less LAN by one of the following methods

Method 1: Setting the Wireless LAN by Wired Network
This method can set the wireless LAN without using attached CD-
ROM.

Note 1: 

PC must be connected to the wireless LAN router/access 
point in advance.

 

    Write down important information such as the SSID and 

security method, etc. of wireless LAN router/access point

.

Procedure:
1.  Check whether PC and wireless LAN router/access point are 

turned on.

2.  Connect the SA-NS510 and the wireless LAN router/access 

point using a LAN cable.

3.  Turn the SA-NS510 on.
4. Click 

“My Network” or “Network” t “SA-NS510”.

 The 

“Sony Network Device Setting” screen appears.

2: Install the UPnP service in advance if using Windows XP.

 

     

Check the set-up of the fi rewall of the security software if 
you cannot fi nd “SA-NS510” or the browser does not open 
even if you double-click “SA-NS510” on screen of PC.

 

     

Restart the PC if you cannot fi nd “SA-NS510”.

5.  Select the desired language when the “Language Setup” screen 

appears.

6.  Select “Network Settings” from the menu.
7.  Enter the SSID of access point, then select the security method.

3: Enter Security key (WEP/WPA key, etc.) if you selected any-

thing other than “No Security” as a security method.

8. Click 

“Apply”

.

9. Click “OK” when the confi rmation screen of the pop-up win-

dow appears.

10. Disconnect the SA-NS510 and the wireless LAN router/access 

point following the on-screen instructions.

 

SA-NS510 restarts automatically, then the [LINK] LED lights 

up in green when the wireless LAN connection is made.

This method can set the wireless LAN with the CD-ROM which 
is attached.

Note 4: It is necessary for the CD-ROM (“NS Setup”) to use a PC of with 

built-in wireless LAN.

 

    Have the wireless network name (SSID) and security key (if ap-

plicable) available for reference.

Procedure:
1.  Connect the AC adaptor to SA-NS510.
 

Check that the [

?/1

] LED changes from fl ashing in green to lit 

in green.

2.  Load the CD-ROM (“NS Setup”) into the CD-ROM drive of 

PC.

 

If the program does not start automatically, double-click on 
“NS_Setup.exe” on the CD-ROM.

3.  Perform setup, following step 1 to 4 of the on-screen instruc-

tions.

 

When setup is completed, press the “Play test sound” button to 
confi rm operation of the speaker by playing the test sound.

 

(The [LINK] LED lights up in green when the wireless LAN 
connection is made)

MODEL  IDENTIFICATION
Distinguish by model number label stuck on the bottom side of a 
main unit.

4-430-610-0s

4-430-611-0s

4-430-612-0s