Read Sony NWZ-ZX1 Service Manual online
NWZ-ZX1
15
2-5. BATTERY ASSY (BAT1)
2-4. BATTERY ASSY (BAT1) WIRE
1 Remove three solders of battery wire.
Note
Note
3:
When the battery wire is removed, refer to
“ABOUT THE HANDLING OF
THE BATTERY ASSY (BAT1)” on page 4.
– Rear top view –
MAIN board
%atter\ aVV\ %$7 wire VettiQJ
[red]
[white]
[black]
battery assy (BAT1)
Note 1: Make sure to remove three solders of battery wires before
disassembling the mechanical common block.
Moreover, when removing solders, remove solder after
turning off a mechanical common block.
Note 2: When replacing some mounted board or electrical parts,
soldering three battery wires after all wirings are connected.
A
B
– Rear top view –
3 spacer (BATT)
spacer (BATT)
guide line
guide line
guide line
guide line
2 Remove the battery block
in the direction of the arrow.
battery assy (BAT1)
3DVWLQJSRVLWLRQRIVSDFHU%$77
Note 2: When installing the battery assy (BAT1), push
firmly the battery assy (BAT1) until it is put
together to guidelines in order of the arrows
A
and
B
.
battery assy
(BAT1)
(BAT1)
MAIN board
4 battery assy (BAT1)
Note
Note
1:
When removing battery assy (BAT1) from
the adhesive sheet (BATT), it is not re-used.
Be sure to exchange it for new parts.
1 Peel off the battery block from
the adhesive sheet (BATT).
Note
1:
When removing battery assy (BAT1) from
the adhesive sheet (BATT), it is not re-used.
Be sure to exchange it for new parts.
Click on the first or last page to see other NWZ-ZX1 service manuals if exist.