Read Sony NWZ-Z1040 / NWZ-Z1050 / NWZ-Z1050N / NWZ-Z1060 Service Manual online
NWZ-Z1040/Z1050/Z1050N/Z1060
15
SECTION 3
SERVICE MODE
1. PREPARATION OF SERVICE MODE
Prepare the following before checking service mode.
Prepare the following before checking service mode.
• Windows
PC
•
USB cable for the WM-PORT (accessory)
•
Service mode tool
(TestModeApplication_for_NW-Z1000-20111123B.zip)
Note: Confi rm the method of obtaining the service mode tool to each ser-
vice headquarters.
2. INSTALLING METHOD OF THE SERVICE MODE
TOOL
Procedure:
1. Unzip the service mode tool on PC, and confi rm that the fol-
1. Unzip the service mode tool on PC, and confi rm that the fol-
lowing folders have been created.
2. Connect PC and “WALKMAN” with the USB cable for the
WM-PORT (accessory).
USB cable
Plug in the USB cable
with facing upward,
making sure the
connection is secure.
with facing upward,
making sure the
connection is secure.
3. Confi rm that the USB connection screen is displayed on
“WALKMAN”, then confi rm that “USB storage in use” is dis-
played.
played.
Note 1: If the USB connection screen is not displayed, swipe the status bar
on the top of the screen then tap “USB connected” on the notifi ca-
tion panel.
tion panel.
USB storage in use
Before turning off USB storage, make sure
you have unmounted (”ejected”) your
Android’s USB storage from your computer.
Turn off USB storage
USB Mass storage
4. Confi rm that “WALKMAN” drive has been recognized on PC.
(In this example, “WALKMAN” is recognized as F drive)
Note 2: When Windows XP is used, after recognizing a drive, the instal-
lation screen of a driver may be displayed. In that case, install a
driver according to screen.
driver according to screen.
5. Open “ServiceModeInstaller-20111123B” folder on PC, and
start “Digital Player Software Update tool” by double-clicking
“FWUpdater.exe”.
“FWUpdater.exe”.
6. Check into the [I agree] box on “Digital Player Software Up-
date tool”, and click the [Next] button.
Note 3: The language displayed in “Digital Player Software Update tool”
changes with linguistic environment of PC.
7. Confi rm that all applications on PC are terminated, and click
the [OK] button on “Digital Player Software Update tool”.
8. Confi rm that the following screen is displayed, and click the
[OK] button on “Digital Player Software Update tool”.
Click on the first or last page to see other NWZ-Z1040 / NWZ-Z1050 / NWZ-Z1050N / NWZ-Z1060 service manuals if exist.