Read Sony NWZ-Z1040 / NWZ-Z1050 / NWZ-Z1050N / NWZ-Z1060 Service Manual online
NWZ-Z1040/Z1050/Z1050N/Z1060
14
2-9. LCD MODULE ASSY (LCD1)
JIG
When disassembling the set, use the following jig.
Part No.
Description
9-913-402-33 Tool for Disassembly
4
Insert the jig in the gap between cabinet (front)
and LCD module assy (LCD1).
Then slide it to arrow direction to remove
the LCD module assy (LCD1).
4
Insert the jig in the gap between cabinet (front)
and LCD module assy (LCD1).
Then slide it to arrow direction to remove
the LCD module assy (LCD1).
– Rear top view –
– Front top view –
2
holder assy
8
LCD module assy (LCD1)
1
screw
(M1.4)
LCD module assy (LCD1)
3
Push the LCD module assy (LCD1) from
the hole of cabinet (front), build gap a little.
LCD flexible board
touch panel flexible board
6
sheet EMC (top)
< see fig. A >
ditch
7
sheet EMC (bottom)
< see fig. B >
< Fig. A >
< Fig. B >
guide line
guide line
LCD flexible board
(rear side)
(rear side)
guide line
guide line
guide line
LCD flexible board
(connector mount side)
(connector mount side)
AttaFKPent poVition oI VKeet (EMC)
– /C' PoGXOe aVV\ (/C') rear ViGe view –
– /C' PoGXOe aVV\ (/C') rear ViGe view –
5
Pull out the LCD flexible board
and touch panel flexible board
from ditch of the cabinet (front).
sheet EMC (top)
sheet EMC (bottom)
Note: Be careful not to damage
each flexible substrate.
Click on the first or last page to see other NWZ-Z1040 / NWZ-Z1050 / NWZ-Z1050N / NWZ-Z1060 service manuals if exist.