Read Sony NWZ-WH303 Service Manual online
NWZ-WH303/WH505
10
2-5. FRONT PLATE ASSY (DR1) (L-CH)
–
L-ch
–
front plate assy
(DR1)
(DR1)
driver
:LUH VHWWLQJ
2 Remove the solder.
1 Check that the short-land is shorted.
3 Remove the solder.
4 front plate assy (DR1) (L-ch)
marking
Note 2: Marking on the driver shows “+” side.
Note 3: The position of marking has a possibility
Note 2: Marking on the driver shows “+” side.
Note 3: The position of marking has a possibility
of having been changed.
[red/green]
Note 1: Must to soldered this
Note 1: Must to soldered this
wire to the "+" side
of the driver.
[green/natural]
1:=-:+
front plate assy
(DR1)
(DR1)
driver
1:=-:+
marking
Note 2: Marking on the driver shows “+” side.
Note 3: The position of marking has a possibility
Note 2: Marking on the driver shows “+” side.
Note 3: The position of marking has a possibility
of having been changed.
[red/green]
Note 1: Must to soldered this
Note 1: Must to soldered this
wire to the "+" side
of the driver.
[green/natural]
HP wire (L) (WR1)
HP wire (L) (WR1)
Click on the first or last page to see other NWZ-WH303 service manuals if exist.