Read Sony NWZ-WH303 Service Manual online
NWZ-WH303/WH505
5
5. Click the “Let me pick from a list of device drivers on my
computer”.
6. Select the “USB Mass Storage Device”, and click the “Next”.
7. Installation is performed and a connection system is changed
into MSC connection.
8. Open the my computer window on PC, and confi rm “WALK-
MAN” is recognized by MSC connection.
9. Continues to “3. How to use the destination setting tool”.
3. How to use the destination setting tool
Procedure:
1. The drive letter of “WALKMAN” is checked (at this example,
1. The drive letter of “WALKMAN” is checked (at this example,
it is “E”).
2. The destination setting tool suitable for the drive letter of
checked “WALKMAN” is used.
• Recognized as “D” drive
• Recognized as “D” drive
t “SHIMUKE changeEN_D_
drive.bat”
• Recognized as “E” drive
t “SHIMUKE changeEN_E_
drive.bat”
• Recognized as “F” drive
t “SHIMUKE changeEN_F_
drive.bat”
• Recognized as “G” drive
t “SHIMUKE changeEN_G_
drive.bat”
• Recognized as “H” drive
t “SHIMUKE changeEN_H_
drive.bat”
• Recognized as “I” drive
t “SHIMUKE changeEN_I_drive.
bat”
• Recognized as “J” drive
t “SHIMUKE changeEN_J_
drive.bat”
3. Start the destination setting tool, confi rm that the following
message has been displayed.
4. Select the destination. The number is input, and press the Enter
key on PC.
Input number
“1”: Except AEP and UK models
“2”: AEP and UK models
5. Confi rm that the following message has been displayed, and
select the ON/OFF of sound pressure level. The number is in-
put, and press the Enter key on PC.
put, and press the Enter key on PC.
Input number
“1”: AEP and UK models
“2”: Except AEP and UK models
6. Select the Capacity selection. The number is input, and press
the Enter key on PC.
Input number
“1”:
NWZ-WH505
“2”:
NWZ-WH303
7. The destination, model name and sound pressure level are
written, and setting is completed.
(Displayed characters/values in the above fi gure are example)
Press the Enter key on PC, close the destination setting tool
window.
window.
8. Open the folder containing the destination setting tool.
9. It checks that the fi le of “GetProductInfo”, “output.bin” and
9. It checks that the fi le of “GetProductInfo”, “output.bin” and
“RESULT” is made.
GetProductInfo: Data read from the unit.
output.bin:
Data after processing.
RESULT:
Data for a check of the contents written in the
unit.
The
“RESULT”
fi le is opened using a binary editor and it
checks that the destination has been changed.
Click on the first or last page to see other NWZ-WH303 service manuals if exist.