Read Sony NWZ-S754 / NWZ-S755 Service Manual online
NWZ-S754/S755
18
4-1-3. Standby current check (DSVCHK)
This mode is used in case standby current is checked.
This mode is used in case standby current is checked.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “POWER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “DSVCHK”.
4. Press the [
u
] key, enter the state of the deep sleep.
5. Press the [BACK] key, release the state of the deep sleep.
Screen display
POWER DSVCHK
OK
6. Press the [BACK] key, return to minor item selection screen.
4-1-4. Charge current check (CHGCHK)
This mode is used in case charge current is checked.
This mode is used in case charge current is checked.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “POWER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “CHGCHK”.
4. Press the [
u
] key, the charge setting is displayed.
Screen display
POWER CHGCHK
AC
AC
5. In this state, each time the [
B
] key is pressed, the port setting
for the charge is changed as shown in the table below.
Port control
Display
CHG_XCHGEN
CHG_PEN1
CHG_PEN2
AC
L
H
H
USB500
L
H
H
USB100
L
H
L
6. Press the [BACK] key, return to minor item selection screen.
4-1-5. Battery voltage detection check (BATTCHK)
This mode is used in case battery voltage is checked.
This mode is used in case battery voltage is checked.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “POWER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys key to select the “BATTCHK”.
4. Press the [
u
] key, the battery voltage is displayed.
When the battery voltage cannot be confi rmed, “ERROR” is
displayed.
displayed.
Screen display
POWER BATTCHK
X.XXXV
X.XXXV: Battery voltage
5. Press the [BACK] key, return to minor item selection screen.
4-1-6. Battery separation (RMVBATT)
Note: Not used for the servicing.
4-2. Audio (AUDIO)
While playing the audio track, it’s in a repeat state. If [BACK] key
is pressed, it’s stopped.
Press the [
While playing the audio track, it’s in a repeat state. If [BACK] key
is pressed, it’s stopped.
Press the [
b
] key to switch the HPOUT/LINEOUT/SPEAKER.
Screen display
MPTAPP (X.XX.XX)
POWER
AUDIO OUTPUT
VIDEO SN
VIDEO OUT
F1
OTHER F2
CLESTE SEPLR
DAC SEPRL
DIREC MAXOUT
FM NMLZR
NC SPCHK
SHUTDOWN SPKCHK
EXITTEST USER1
EXITTEST USER1
USER2
USER3
Click on the first or last page to see other NWZ-S754 / NWZ-S755 service manuals if exist.