Read Sony NWZ-S754 / NWZ-S755 Service Manual online
NWZ-S754/S755
14
2-9. LCD ASSY (LCD1)
A
2 Remove the LCD assy flexible board in the
direction of arrow
A.
two ditches
claw
claw
main block
two ribs
4 LCD assy (LCD1)
1 cover light
1 Paste the cover light
on the main block.
Note 1: There is a possibility of damaging LCD assy flexible board when
removing excluding the direction of arrow
A.
Note 2: Please match the position of two ditches and two ribs when you install
LCD assy flexible board.
If putting into the connector shift ditch and rib, connector will be broken.
OK
NG
NG
3 Pull out the LCD assy flexible board
from the ditch of the chassis assy.
Note 3: Please pull it out carefully so
as not to damage.
– Front side view (bottom side) –
Note tKe Fover OiJKt instDOOinJ
2 Install the cover (LCD) on the main block and
fix the cover light.
Note 4: Please detach the cover (LCD) from
the mechanical front assy referring to
“2-4. MECHANICAL FRONT ASSY”
on page 11.
3 Paste the adhesive sheet (cover LCD).
Note 5: The adhesive sheet (cover LCD)
cannot be reused.
Please use it for new parts.
Click on the first or last page to see other NWZ-S754 / NWZ-S755 service manuals if exist.