NWZ-F885, NWZ-F886, NWZ-F887 - Sony Audio Service Manual (repair manual). Page 31

7.  Hold down the [

1

] button on “WALKMAN”, and confi rm that 

“WALKMAN” boots up normally.

 (The 

following 

fi gure is example of display)

[1] button

10:16

Wed, October 5

8.  Connect PC and “WALKMAN” with the USB cable for the 

WM-PORT (accessory).

USB cable

Plug in the USB cable 
with        facing upward, 
making sure the
connection is secure.

9. Confi rm that the USB connection screen is displayed on 

“WALKMAN”, and confi rm that charge is performed normal-
ly.

Note 2: If the USB connection screen is not displayed, swipe the status bar 

on the top of the screen then tap “USB connected” on the notifi ca-
tion panel.

USB storage in use

USB mass storage

6:09

Before turning off USB storage, unmount

(”ejecte”) your Android’s USB storage from

your computer.

Turn off USB storage

10. Assemble “WALKMAN” completely, and the confi rming  is 

completed.

Note 1: After work is completed, uninstall the service mode tool abso-

lutely.

  (Refer to “3. UNINSTALLING METHOD OF THE SERVICE 

MODE TOOL” on page 23 about procedure)

Note 2: When this unit connects with some site in order to perform the 

operation check (When the connection with WiFi and the opera-
tion check of browser, etc. are performed etc.), the WiFi setting 
list and the history of browser, etc. remain on this unit.

 

    In that case, perform reset and initialization with reference to 

page 4.

 

    (When initialization is performed, all user informations are 

cleared)