Read Sony HDR-FX1 / HDR-FX1E / Q002-HDR1 (serv.man6) Service Manual online
SERVICE MANUAL
Q002-HDR1
US Model
Canadian Model
Differences Manual
Revision History
Revision History
Ver 1.1 2005. 09
Sony EMCS Co.
2005I1600-1
©200509
Published by DI Technical Support Department
9-876-882-41
Q002-HDR1
LEVEL
1
• This Service Manual shows only the difference from HDR-FX1 of the HDR-FX1/FX1E model.
Refer to the Service Manual Level1 (9-876-770-41) of HDR-FX1/FX1E also for repair.
• All of the accessories supplied with the Q002-HDR1 are listed in this manual.
• INSTRUCTION MANUAL is shown at the end of this document.
Q002-HDR1
RMT-840
DIGITAL HD VIDEO CAMERA RECORDER
Z (Z300) MECHANISM
— 2 —
Q002-HDR1
SPECIFICATIONS
System
Video recording system (HDV)
2 rotary heads, Helical scanning system
Video recording system (DV)
2 rotary heads, Helical scanning system
Audio recording system (HDV)
Rotary heads, MPEG-1 Audio Layer2
Quantization: 16 bits (Fs 48 kHz, stereo)
Transfer rate: 384 kbps
Quantization: 16 bits (Fs 48 kHz, stereo)
Transfer rate: 384 kbps
Audio recording system (DV)
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo 1,
stereo 2), 16 bits (Fs 48 kHz, stereo)
Quantization: 12 bits (Fs 32 kHz, stereo 1,
stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
NTSC color, EIA standards, 1080/60i
specification
specification
Usable cassette
Mini DV cassette with the
mark
printed
Tape speed (HDV)
Approx. 18.81 mm/s
Tape speed (DV)
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time (HDV)
60 min (using a DVM60 cassette)
Recording/playback time (DV)
SP: 60 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
Fast forward/rewind time
Approx. 2 min 40 s (using a DVM60 cassette)
Viewfinder
Electric viewfinder (color)
Image device
6 mm (1/3 type) 3CCD (Charge Coupled
Device)
Gross: Approx. 1 120 000 pixels
Effective: Approx. 1 070 000 pixels
Device)
Gross: Approx. 1 120 000 pixels
Effective: Approx. 1 070 000 pixels
Lens
Carl Zeiss Vario-Sonnar SQ T*
Combined power zoom lens
Filter diameter: 72 mm (2 7/8 in.)
12
Combined power zoom lens
Filter diameter: 72 mm (2 7/8 in.)
12
×
(Optical)
F = 1.6 ~ 2.8
Focal length
4.5 - 54 mm (3/16 - 2 1/4 in.)
When converted to a 35 mm still camera
32.5 - 390 mm (1 5/16 - 15 3/8 in.)
(40 - 480 mm (1 5/8 - 19 in.) in 4:3 TV mode)
When converted to a 35 mm still camera
32.5 - 390 mm (1 5/16 - 15 3/8 in.)
(40 - 480 mm (1 5/8 - 19 in.) in 4:3 TV mode)
Color temperature
[AUTO], [ONE-PUSH A/B], [INDOOR]
(3 200 K), [OUTDOOR] (5 800 K)
(3 200 K), [OUTDOOR] (5 800 K)
Minimum illumination
3 lx (lux) (F 1.6)
Input/Output connectors
Audio/Video input/output
Video signal: 1 Vp-p, 75
Ω
(ohms),
unbalanced, sync negative
Audio signal: 327 mV (at load impedance
47 k
Audio signal: 327 mV (at load impedance
47 k
Ω
(kilohms)), Input impedance more than
47 k
Ω
(kilohms), Output impedance less than
2.2 k
Ω
(kilohms)
S VIDEO input/output
Luminance signal: 1 Vp-p, 75
Ω
(ohms),
unbalanced
Chrominance signal: 0.286 Vp-p, 75
Chrominance signal: 0.286 Vp-p, 75
Ω
(ohms), unbalanced
COMPONENT OUTPUT jack
Y: 1 Vp-p (0.3 V sync negative)
P
P
B
/P
R
, C
B
/C
R
: +/- 350 mVp-p, Input
impedance 75
Ω
(ohms)
Headphones jack
Stereo minijack (Ø 3.5 mm)
LANC jack
Stereo mini-minijack (Ø 2.5 mm)
MIC jack
Minijack, 0.388 mV low impedance with DC
2.5 to 3.0 V, output impedance 6.8 k
2.5 to 3.0 V, output impedance 6.8 k
Ω
(kilohms) (Ø 3.5 mm), Stereo type
HDV/DV jack
i.LINK Interface (IEEE1394, 4-pin connector
S400)
S400)
LCD screen
Picture
8.8 cm (3.5 type)
Total dot number
250 000 (1 120
×
224)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor/charger)
DC 8.4 V (AC Adaptor/charger)
Average power consumption (when using the
battery pack)
battery pack)
During camera recording using the viewfinder
with normal brightness:
HDV recording 7.4 W
DV recording 6.9 W
During camera recording using the LCD with
normal brightness:
HDV recording 8.0 W
DV recording 7.5 W
with normal brightness:
HDV recording 7.4 W
DV recording 6.9 W
During camera recording using the LCD with
normal brightness:
HDV recording 8.0 W
DV recording 7.5 W
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Storage temperature
-20
°
C to + 60
°
C (-4
°
F to + 140
°
F)
Dimensions (approx.)
166
×
194
×
362 mm (6 5/8
×
7 3/4
×
14 3/8
in.) (w/h/d)
Mass (Approx.)
2.1 kg (4 lb 10 oz) main unit only
2.4 kg (5 lb 4.6 oz) including the NP-F970
rechargeable battery pack, DVM60 cassette
and lens hood.
2.4 kg (5 lb 4.6 oz) including the NP-F970
rechargeable battery pack, DVM60 cassette
and lens hood.
AC Adaptor/charger AC-VQ850
Power requirements
AC 100 - 240 V, 50/60 Hz
12/24 V (only for negative grounded cars)
12/24 V (only for negative grounded cars)
Power consumption
25 W
Charging mode:
35 VA (AC 100V), 50 VA (AC 240 V)
Operating mode:
40 VA (AC 100 V), 50 VA (AC 240 V)
Charging mode:
35 VA (AC 100V), 50 VA (AC 240 V)
Operating mode:
40 VA (AC 100 V), 50 VA (AC 240 V)
Output voltage
DC OUT:
8.4 V, 2.0 A in operating mode
Battery charge terminal”
8.4 V, 1.4 A in charge mode
8.4 V, 2.0 A in operating mode
Battery charge terminal”
8.4 V, 1.4 A in charge mode
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Storage temperature
-20
°
C to + 60
°
C (-4
°
F to + 140
°
F)
Dimensions (approx.)
136
×
48
×
90 mm (5 1/8
×
1 10/16
×
3 1/2 in.)
(w/h/d) excluding the projecting parts
Mass (approx.)
280 g (9.9 oz)
Rechargeable battery pack (NP-F970)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
47.5 Wh (6 600 mAh)
Dimensions (approx.)
38.4
×
60.0
×
70.8 mm
(1 9/16
×
2 3/8
×
2 7/8 in.) (w/h/d)
Mass (approx.)
300 g (10.6 oz)
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Type
Lithium ion
Shoulder brace
Dimensions (approx.)
250
×
125
×
90 mm
(9 7/8
×
5
×
3 5/8 in.) (w/h/d)
Mass (approx.)
400 g (14.2 oz)
External microphone ECM-672
General
Type
Type
Back-element condenser microphone
Power supply
IEC R6P battery (size AA)
×
1
External power supply DC 48 V
Standard operating voltage
Internal battery: DC 1.5 V
Minimum operating voltage
Internal battery: aprrox. DC 1.1 V
Battery life
Approx. 3 000 hours (with Sony SUM-3(NS))
Current drain
Internal battery: less than 0.3 mA
External power supply: less than 0.5 mA
External power supply: less than 0.5 mA
Output connector
Cannon XLR-3-12C type
Dimensions (approx.)
24 dia.
×
304 mm (31/32 dia.
×
12 in.)
Mass (approx.)
250 g (8.8 oz)
Performance
Frequency response
Frequency response
50 - 16 000 Hz
Directivity
Uni-directional
Output impedance
250
Ω
(ohms)
±
20%, balanced
Sensitivity (deviation
±
2 dB)
Open circuit voltage: -42.0 dB
(7.94 mV, 0 dB = 1 V/1 Pa at 1 kHz)
Recommended load impedance: more than
3 k
(7.94 mV, 0 dB = 1 V/1 Pa at 1 kHz)
Recommended load impedance: more than
3 k
Ω
(kilohms)
Signal-to-noise ratio
More than 72 dB (at 1 kHz, 1 Pa)
Inherent noise
Less than 22 dB SPL (0 dB = 20
µ
Pa)
Wind noise*
Less than 55 dB SPL (without wind screen)
Less than 45 dB SPL)(with wind screen)
Less than 45 dB SPL)(with wind screen)
Induction noise from external magnetic field**
Less than 0 dB SPL/mG
Low-cut filter
Cut-off frequency: 75 Hz (M), 180 Hz (V)
Maximum input sound pressure level
114 dB SPL (10.0 Pa)
(input level for 1% waveform distortion at 1
kHz, converted into equivalent input sound
pressure level; 0 dB = 20
(input level for 1% waveform distortion at 1
kHz, converted into equivalent input sound
pressure level; 0 dB = 20
µ
Pa)
Dynamic range
More than 92 dB
Ambient temperature range
For operation: 0
°
C to + 60
°
C (+32
°
F to +
140
°
F)
For storage: -20
°
C to + 60
°
C (+32
°
F to +
140
°
F)
* Wind noise is the value measured by applying a
wind velocity of 2 m/s (6.6 ft/s) from all directions
to the microphone. the mean value is taken and
converted to the equivalent sound pressure level
(0 dB =
to the microphone. the mean value is taken and
converted to the equivalent sound pressure level
(0 dB =
20
µ
Pa).
**External magnetic field induction noise is measure
with the microphone placed in an alternating
magnetic field of 50 Hz, 1 mG. The maximum noise
value is taken and then converted to the equivalent
sound pressure level (0 dB =
magnetic field of 50 Hz, 1 mG. The maximum noise
value is taken and then converted to the equivalent
sound pressure level (0 dB =
20
µ
Pa).
Design and specifications are subject to change
without notice.
without notice.
— 3 —
Q002-HDR1
Other accessories
2-594-137-11 MANUAL, INSTRUCTION (ENGLISH)
Lens hood (1)
2-186-430-01
2-186-430-01
Checking supplied accessories.
Large eyecup (1)
2-179-414-01
2-179-414-01
AC Adaptor/charger (1)
0
1-418-821-32
Power cord (1)
0
1-830-405-11
Connecting cord
(DK-215) (1)
(DK-215) (1)
0
1-783-710-24
A/V connecting cable (1)
1-824-097-61
1-824-097-61
Component video cable(1)
1-829-414-41
1-829-414-41
i.LINK cable (1)
1-757-541-12
1-757-541-12
Wireless Remote
Commander (1)
(RMT-840)
1-478-953-21
Commander (1)
(RMT-840)
1-478-953-21
Shoe adaptor (1)
X-2023-305-3
X-2023-305-3
External microphone
(monaural) (1)
A-4500-395-A
(monaural) (1)
A-4500-395-A
Microphone cable (1)
1-830-591-11
1-830-591-11
Wind screen (1)
X-2539-401-1
X-2539-401-1
Shoulder brace (1)
X-2055-882-1
X-2055-882-1
Shoulder strap (1)
X-2055-883-1
X-2055-883-1
Cleaning cassette (1)
8-883-121-64
8-883-121-64
Cleaning cloth (1)
2-598-741-01
2-598-741-01
Rechargeable battery pack
(NP-F970) (1)
(not supplied)
(NP-F970) (1)
(not supplied)
Size AA (R6) batteries for
Remote Commander (2)
(not supplied)
Remote Commander (2)
(not supplied)
Size AA (R6P) battery for
microphone (1)
(not supplied)
microphone (1)
(not supplied)
The components identified by mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number specified.
0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour
la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
Lid battery
case (1)
3-742-854-01
case (1)
3-742-854-01