NW-ZX2 - Sony Audio Service Manual (repair manual). Page 8

Read Sony NW-ZX2 Service Manual online

NW-ZX2
8
9.  On PC, wait for a while until progress will be 100%.
Note 5:
 “WALKMAN” is rebooted automatically.
10. On PC, confi rm that the following screen is displayed, and 
click the [Finish] button on “Digital Player Software Update 
tool”.
11. Confi rm that the following screen is displayed on “WALK-
MAN”, and tap the [OK] button, and destination setting is 
completed.
USB storage in use
USB mass storage
6:09
Before turning off USB storage, unmount
(”ejecte”) your Android’s USB storage from
your computer.
Turn off USB storage
System Update
Update to version NONE
completed successfully.
OK
2-3. Newest fi rmware update
Procedure:
1.  On PC, refer to following procedures, and unzip the newest 
fi rmware update tool corresponding to “WALKMAN” re-
paired, and confi rm that the folder has been created.
Destination
Tool name
Except Chinese 
model
icx1265_002-J.1.00.02-user-relkey-
updater.zip
Chinese model
icx1265_005-J.1.00.02-user-relkey-
updater.zip
 
(The underline of the tool name shows the version)
2.  Connect PC and “WALKMAN” with the USB cable for the 
WM-PORT.
USB cable
Plug in the USB cable 
with        facing upward, 
making sure the
connection is secure.
3. Confi rm that the USB connection screen is displayed on 
“WALKMAN”, then confi rm that “USB storage in use” is dis-
played.
Note 1:
 If the USB connection screen is not displayed, swipe the status bar 
on the top of the screen then tap “Turn off USB storage” on the 
notifi cation panel.
USB storage in use
USB mass storage
6:09
Before turning off USB storage, unmount
(”eject”) your Android’s USB storage from
your computer.
Turn off USB storage
4. On PC, confi rm that “WALKMAN” drive has been recog-
nized.
 
(In this example, “WALKMAN” is recognized as F drive)
– Continued on next page –
Page of 48
Display

Click on the first or last page to see other NW-ZX2 service manuals if exist.