NW-MS7 - Sony Audio Service Manual (repair manual). Page 4

– 4 –

This section describes how to install the OpenMG Jukebox software to your computer. Before
installation, turn on your computer, and start Windows 98.

Be sure to install the software before connecting with the supplied USB cable. Do not install the software while
connecting the USB cable. Connect the USB cable only after you have restarted the computer after installation.

    Insert the supplied CD-ROM into the CD-ROM drive of your computer.

The Setup program automatically starts and the following window appears. If the program
does not start, double-click [setup.exe].

    Follow the instructions in the Installer window to complete the installation.

When the Input window for the CD key appears, input the CD key written on the CD-ROM
case label .
When the installation is finished, the following dialog box appears in the display.

Click Finish to restart the computer.

Do not delete, move or modify the installed folder.

When you restart the computer after installing the software, the “OpenMG(NW-MS7)
Registration” icon will appear on the desktop. Make sure that you can connect to Internet, then
double-click this icon to start customer registration for this product (Memory Stick Walkman)
and for the EMD services.

For details on registration, refer to the supplied leaflet.

This section describes how to record the contents of a compact disc onto the hard drive of your
computer, and then how to transfer it to Memory Stick Walkman (Check-Out).

You can also download by using EMD Services, or convert MP3 files and WAV format audio
files. Please refer to the online help for more information.

    Connect Memory Stick Walkman to your computer.

1

 Insert “MagicGate Memory Stick.”

• Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed.
• Use of this player with a USB hub or a USB extension cable is not guaranteed.
• A malfunction may occur depending on the USB devices connected at any one time.
• Be sure to connect the player to an AC wall outlet when connecting it to your computer.
• When connecting Memory Stick Walkman to your computer for the first time, the USB driver Installer

window appears. Please follow the instructions in the Installer window.

“MagicGate
Memory
Stick“

Memory Stick slot

2

 Connect the AC power adaptor.

Connect the supplied AC power adaptor to
an AC wall outlet, then into the DC IN 5.5V
jack on the right side of the DC/USB
adaptor.

3

 Connect Memory Stick Walkman to your

computer.
Connect the small connector of the supplied
USB cable into the USB jack on the left side
of the DC/USB adaptor, then the large
connector to the USB jack of your computer.
“PC CONNECT” appears in the display.

USB cable
(supplied)

to 

to 

DC/USB
adaptor

AC power adaptor
(supplied)

to AC
wall outlet

• When connecting Memory Stick Walkman

to your computer, make sure the erasure
prevention switch of the “Memory Stick”
(page 30) is OFF .

• Do not start your computer while Memory

Stick Walkman is connected.

to DC IN 5.5V

    Start the OpenMG Jukebox software.

Double click the OpenMG Jukebox icon on the desktop or click [Start]–[Programs]–
[OpenMG Jukebox]–[OpenMG Jukebox]
The OpenMG Jukebox window appears.

z

The OpenMG Jukebox software automatically starts when Memory Stick Walkman is connected to your
computer. (Please refer to the online help for more information.)

    Start recording.

You can record music from a compact disc onto the hard drive of your computer, using the
OpenMG CD Recorder software.
1

 Insert the compact disc you want to record into the CD-ROM drive of your computer. If

the OpenMG CD Recorder automatically starts, go to 3.

2

 Click the [Recorder] button in the OpenMG Jukebox window.

The OpenMG CD Recorder window appears showing the contents of the compact disc.

This message appears when you use the OpenMG CD Recorder for the first time. We recommend you
to choose “Yes.” You can optimize the CD drive later, too. Please refer to the online help for more
information. (It may take maximum 20 minutes to optimize the CD drive.)

3

 Click z.

The recording begins. When recording is finished, the recorded music will appear in the
OpenMG Jukebox window as a new album.

bit rate

z

 button

Portable Player window
(the music files inside the
“Memory Stick” appear)

To use OpenMG-enabled EMD services on the Internet, the following conditions are required.

• You need Internet access from your computer. (Sign up an Internet service provider.)
• You need to download several programs (e.g., EMD key installer).
To download these programs, double-click the “OpenMG Registration” icon, then follow the
displayed instructions.

• You need to register yourself with the EMD service provider you are going to use. Consult the

provider for details.

1 In order to update your OpenMG Jukebox software, your current software must be registered.

If your software is not registered, please register your current software now. If you are a
registered user, proceed to step 2.

2 Insert the CD-ROM supplied with your new product. This will automatically run. If the

program does not start, double-click [Setup.exe].
Please follow the on-screen instructions to retain all existing music files and update your
software.

3 After your update is completed, restart the computer.

Then double-click the “OpenMG(NW-MS7) Registration” icon on your desktop and follow the
instructions to register.

• If the OpenMG Jukebox icon is displayed on the task tray, right-click the icon to choose [Remove from the

task tray], then proceed with the installation.

• Be sure to input the CD keys of the CD-ROM you are going to install. If an error message appears in the

display, check if the CD keys are of the correct CD-ROM case label.