Read Sony NW-E5 Service Manual online
10
NW-E5
LCD check
Check the condition of indication by all display is lit or not.
Bx key : check start
Flash memory bad block check
OK
: Flash The back light turns on
NG
: Flash The back light turns on and off
AVLS key : select the destination
AREA E-12 (AEP, UK, Franch, German).
Destination setting
Bx key : Enter the destination
OK
: The back light turns on
NG
: The back light turns on and off
Contrast adjustment
Display
n LCD 45 – 13
contrast value (Initial value : 45)
>, . key : Select the contrast value.
Bx key
: Enter the contrast value.
Normally, do not perform this adjustment.
Low voltage check
Low voltage detection check
OK
: Lo Bat OK The back light turns on
NG
: Lo Bat NG The back light turns on and off
Battery high voltage detection check
High DC detection check
OK
: Hi DC OK The back light turns on
NG
: Hi DC NG The back light turns on and off
Battery low voltage detection check
Low DC detection check
OK
: Lo DC OK The back light turns on
NG
: Lo DC NG The back light turns on and off
Description of each Mode ( : indication on display)
n
The regulated DC power supply voltage supplied to USB connector on checking each voltage value.
OK
NG
Low voltage check
0.9V
1.0V or more
High DC detection check
7.0V or more
6.0V or less
Low DC detection check
4.0V or less
5.0V or more
Click on the first or last page to see other NW-E5 service manuals if exist.