Read Sony NW-E303 Service Manual online
13
NW-E303
SECTION 3
TEST MODE
STANDING PROCEDURE
Procedure 1: In HOLD state, while pushing Nx button and
/ MENU button, push [REST].
When the test mode is set, the LCD display appears
as shown below.
as shown below.
Procedure 2: After starting up test mode, the following contents
can be checked.
TEST MODE
256M 1.00.01 G14
The place of destination
FW version
NAND FLASH RAM capacity
FW version
NAND FLASH RAM capacity
BUTTON NAME
DESCRIPTION
/MENU
Push the
/MENU button, so displayed Fmax/
Fmin for FM broadcast received frequency.
A display change as shown below whenever the
/MENU button is pushed.
FM[P__}76.0MHz
FM[P__}TV 3CH
DISP/FM
Displayed “TUNER OFF”.
u (AMS+)
Displayed charge mode (100mA/500mA).
A display change as shown below whenever the
u (AMS+) button is pushed.
Charge Mode 500m
Charge Mode 100m
U (AMS–)
Display Charge ON/OFF.
Change a display as shown below whenever the
U (AMS–) button is pushed.
Charge On
Charge Off
HOLD
Change a display as shown below whenever in the
state of HOLD ON.
• LCD lights up to a checkered pattern.
• All LCD lights on.
In the state of HOLD OFF.
• Displayed “HOLD KEY OFF”
VOL
i
Displayed “Beep: ON”
VOL
I
Displayed “Beep: OFF”
REP/SOUND
Push the REP/SOUND button, so “Initialized” is
displayed.
Initialized. (Turn to the factory preset state, time,
volume setting and so on.) The music data and files
in the memory are not changed.
Nx
“Check all key” is displayed, so the key test mode
is activated, when the Nx button is pressed.
Push all button around.
Escape a test mode if the Nx button is pressed
at last.
Click on the first or last page to see other NW-E303 service manuals if exist.