Read Sony NW-E2 / NW-E3 Service Manual online
– 8 –
2-5. BUTTON (PLAY/STOP), HOLDER (KNOB, SPRING), KNOB (FF/REW)
2-4. LCD UNIT
4
LCD flexible board
(Peel from “chassis, LCD”)
(Peel from “chassis, LCD”)
3
Pull out LCD chassis with tilting.
Chassis, LCD
Knob (HOLD)
Knob (FF/REW)
Case ASSY
Case ASSY
Chassis, LCD
Projection
5
Claws
LCD unit
HOLD switch (S800)
1
2
6
4
Knob (FF/REW)
Case ASSY
Knob (FF/REW)
1
Button (PLAY/STOP)
Put Gummed tape on surface, and pull it off.
2
Press Holder (knob, spring) down with
picking its claws up both sides with tweezers.
Gummed tape
3
Holder (knob, spring)
Tweezers
Holder (knob, spring)
NOTE ON ATTACHING
• On attaching LCD unit to Case ASSY, in
• On attaching LCD unit to Case ASSY, in
case of pressing Knob (FF/REW), it is hard
to attach it.
to attach it.
• Combine HOLD switch (S800) with Knob
(HOLD).
• Combine the projection on LCD chassis
with Case ASSY.
NOTE ON ATTACHING
1. Insert Holder (knob, spring) from
1. Insert Holder (knob, spring) from
the bottom side of Case ASSY
with tweezers.
with tweezers.
2. Attach Knob (FF/REW) in with
pressing Holder (knob, spring).
3. Attach Button (PLAY/STOP) with
setting
B
x
marked position.
Ver 1.3 2001.02
Click on the first or last page to see other NW-E2 / NW-E3 service manuals if exist.