Read Sony NW-E2 / NW-E3 Service Manual online
– 7 –
SECTION 2
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-1. CHASSIS ASSY, CASE ASSY
2-2. LID, CASE
r
The equipment can be removed using the following procedure.
2
Screw B1.7x4
3
1
Chassis ASSY
Lid, case
Chassis ASSY
Set
Lid, Case
Case ASSY
LCD unit
Knob (PLAY/STOP), holder (knob, spring), knob (FF/REW)
Main board, Power board
1
Screw M1.4
5
Plate, lock
2
Screw (1.7x2.5)
6
LCD flexible board
4
Pull out Chassis
ASSY halfway.
Case ASSY
Case ASSY
Chassis ASSY
Chassis ASSY
Knob (FF/REW)
Knob (FF/REW)
3
7
Lid, connector
5
6
4
Chassis (lower)
Chassis (upper)
CN704
CN702
Power board
Main board
1
Mode switch flexible board
(Peel from Chassis (upper))
3
Claws
2
Claw
2-3. MAIN BOARD, POWER BOARD
NOTE ON ATTACHING
On attaching Chassis ASSY, insert it straightly
without strength not to touch Knob (FF/REW).
With strength, sometimes Holder (knob,
spring) in Case ASSY is damaged.
On attaching Chassis ASSY, insert it straightly
without strength not to touch Knob (FF/REW).
With strength, sometimes Holder (knob,
spring) in Case ASSY is damaged.
Ver 1.3 2001.02
Click on the first or last page to see other NW-E2 / NW-E3 service manuals if exist.