Read Sony NAS-Z200DIR / NAS-Z200IR Service Manual online
NAS-Z200DiR/Z200iR
5
HOW TO EJECT THE DISC WHEN POWER SWITCH TURNS OFF
Note: Please take out the CD mechanism block from a set.
MAIN BOARD SERVICE POSITION
• In checking the MAIN board, prepare extension jig (Part No. J-2501-102-A: 1.00 mm pitch, 13 cores, length 300 mm).
• In checking the MAIN board, prepare extension jig (Part No. J-2501-102-A: 1.00 mm pitch, 13 cores, length 300 mm).
Note: Please connect it after taking out MAIN board, DMB19C-32NUA-JFK board and CD mechanism block of the set referring to Section 2 Disas-
sembly (page 15)
Please rotate the pully in the direction of the arrow after removing mechanism deck,
and eject the disc.
and eject the disc.
disc
– CD MECHANISM BLOCK Bottom view –
MAIN board
DMB19C-32NUA-JFK board
CD mechanism block
Connect extension jig (Part No. J-2501-102-A) to
the MAIN board (CN605) and
DMB19C-32NUA board (CN109).
the MAIN board (CN605) and
DMB19C-32NUA board (CN109).
HP board
Click on the first or last page to see other NAS-Z200DIR / NAS-Z200IR service manuals if exist.