Read Sony MHC-GN1000D / SS-CT1000D / SS-CT999D / SS-GN1000D / SS-GN1000S / SS-GN999D / SS-GN999S / SS-RSX1000D / SS-RSX999D / SS-WGV1000D / SS-WGV999D Service Manual online
SURROUND SPEAKERS/SUB WOOFER
Published by Sony Techno Create Corporation
© 2006.05
RECEIVER SYSTEM
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
magnetically shielded
Woofer:
type
Full range:
type, magnetically shielded
Full range:
magnetically shielded
Woofer:
magnetically shielded
Woofer:
Woofer:
bass-reflex type,
magnetically shielded
Full range:
magnetically shielded
Subwoofer:
R1402
R1403
R1404
•
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
the heated tip is applied for too long, so be careful!
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
also be added to ordinary solder.
• All capacitors are in
ances.