MDS-S38, MDS-S39, MDS-S707 - Sony Audio Service Manual (repair manual). Page 4

— 4 —

The special jig (J-2501-124-A) is useful for checking the waveform of the BD board. The names of terminals and the checking items to be
performed are shown as follows.

I+3V : For measuring IOP (Check the deterioration of the optical pick-up laser)
IOP

: For measuring IOP (Check the deterioration of the optical pick-up laser)

TEO : TRK error signal (Traverse adjustment)
VC

: Reference level for checking the signal

RF

: RF signal (Check jitter)

IOP

I + 3V

TEO

VC

RF

Mechanism deck

CN110

Jig

(J-2501-124-A)

The system microprocessor can be reset in the following way.
Use these methods when the unit cannot be operated normally due to the overrunning of the microprocessor, etc.

Method :
Disconnect the power plug, short-circuit JW143 and JW164 on the main board with a pincette or etc.

S301

CN302

JW143

JW164

C001