Read Sony MDS-LSA1 Service Manual online
14
11
GB
Hooking Up the i.LINK Components
i.LINK S200
v
v
i.LINK
i.LINK
Mains lead
Receiver,
etc.
etc.
*
CD
player,
etc.
player,
etc.
*
Required cords
i.LINK connecting cables (2) (only one supplied)
Things you should keep in mind while
hooking up the system
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not connect any mains lead until all the connections
ar e completed.
• Be sur e the connections ar e firm to pr event hum and
noise.
Jacks for connecting i.LINK components
Connect an
To the
Receiver or CD player , etc.
i.LINK S200 connector
Note on i.LINK component hookups
If a metal object should fall into the i.LINK S200
connector , short-cir cuiting may occur and damage the
components.
connector , short-cir cuiting may occur and damage the
components.
About optional i.LINK connecting cables
Be sure to use the Sony i.LINK S200 connecting cables
(4 pins-4 pins).
(4 pins-4 pins).
About i.LINK components to be used in
combination with the MD deck
combination with the MD deck
The following i.LINK components can be used with the
MD deck:
• STR-LSA1 receiver
• CDP-LSA1 CD Player
MD deck:
• STR-LSA1 receiver
• CDP-LSA1 CD Player
z
For general information about i.LINK
See “About i.LINK” on page 38.
Connecting the mains lead
Connect the mains lead of the deck to a wall outlet.
Note
If you use a timer , connect the mains lead to the outlet of the
timer .
*
You can connect the i.LINK components to either i.LINK S200 connector
10
GB
Before You Start the
Hookup
Hookup
Checking the supplied accessories
This MD deck comes with the following items:
• i.LINK connecting cable (1)
• Remote commander (remote) (1)
• i.LINK connecting cable (1)
• Remote commander (remote) (1)
Before using the supplied remote
The supplied r emote alr eady contains a battery . Before
using the remote, pull out the insulating sheet to allow the
power to flow from the battery .
using the remote, pull out the insulating sheet to allow the
power to flow from the battery .
To avoid battery leakage
If you don’t use the remote for an extended period of time,
remove the battery to avoid possible damage from battery
leakage and corr osion.
z
When to replace the battery
Under normal conditions, the battery should last for about six
months. When the remote no longer operates the deck, replace
the battery with new kne.
Notes on lithium battery
• Keep the lithium battery out of the r
each of the children.
Should the battery be swallowed, immediately consult a doctor .
• Wipe the battery with a dry cloth to assur e a good contact.
• Be sur e to observe the corr ect polarity when inserting the
battery .
• Do not hold the battery with metallic tweezers, otherwise a
short-cir cuit may occur .
WARNING
Battery may explode if mistr eated.
Do not rechar ge, disassemble, or dispose of in fire.
Getting
Started
Started
This chapter pr ovides information on
the supplied accessories, things you
should keep in mind while hooking
up the system, and how to connect
i.LINK components to the MD deck.
Be sur e to r ead this chapter
thor oughly befor e you actually
the supplied accessories, things you
should keep in mind while hooking
up the system, and how to connect
i.LINK components to the MD deck.
Be sur e to r ead this chapter
thor oughly befor e you actually
connect anything to the deck.
Click on the first or last page to see other MDS-LSA1 service manuals if exist.