Read Sony MDS-JA30ES Service Manual online
— 9 —
3-2. BRACKET (MOTOR) ASSY
1
Two screws
(BVTT 3x6)
(BVTT 3x6)
2
Two screws
(BVTT 3x6)
(BVTT 3x6)
4
Bracket (Motor) assembly
3
Connector (CN198 : HMOT board)
3-3. HOLDER ASSY
Shaft
A
Slider assembly
1
When removing, move the slider assembly
in the arrow direction, and check that shaft
A is at the position shown in the figure.
in the arrow direction, and check that shaft
A is at the position shown in the figure.
3
Remove the four screws (BVTT 3x6), and
remove the four collars (dampers) and four
compression springs.
remove the four collars (dampers) and four
compression springs.
2
Connector
(CN198 :
HMOT board)
(CN198 :
HMOT board)
Click on the first or last page to see other MDS-JA30ES service manuals if exist.