Read Sony MDS-JA30ES Service Manual online
— 8 —
SECTION 3
DISASSEMBLY
Note :
Follow Xthe disassembly procedure in the numerical order given.
3-1. TRAY ASSEMBLY
1
Rotate the pulley gear in the arrow
direction
direction
A
, and pull out the tray
assembly.
2
Two screws
(PTP 2.6x6)
(PTP 2.6x6)
3
Two screws
(PTP 2.6x6)
(PTP 2.6x6)
6
Gear 4
(Two gear)
(Two gear)
7
Screw
(BVTT 3x6)
(BVTT 3x6)
9
Shaft
0
Remove the tray assembly
in the arrow direction
in the arrow direction
B
.
A
B
Bracket (TOP)
Note:
When attaching the bracket (TOP), attach while
pressing the switch as shown in the figure.
When attaching the bracket (TOP), attach while
pressing the switch as shown in the figure.
• Precautions on Attaching
(Assemble in the reverse order of removal.)
Slider assembly
When attaching the tray assembly, first move the slider
assembly in the arrow direction
assembly in the arrow direction
B
and set Pin
A
at the
position shown.
When attaching gear 4 (two in front), pull the tray
assembly in arrow direction
assembly in arrow direction
A
completely, and
position racks (L), (R) and (D) as shown in the
figure.
figure.
Rack (L)
Gear 4
Rack (D)
Hole
A
B
5
Gear 4
(Two gear)
(Two gear)
8
Stopper
(Shaft A)
(Shaft A)
Pin
A
4
Bracket
(TOP)
(TOP)
Click on the first or last page to see other MDS-JA30ES service manuals if exist.