Read Sony ICF-J1 Service Manual online
– 8 –
• “GEAR (TUNING CAPACITOR)”, “SPRING (GEAR)” AND “GEAR (B), TUNING CAPACITOR”
“GEAR (TUNING CAPACITOR)”, “SPRING (GEAR)” AND “GEAR (B), TUNING CAPACITOR” SETTING
gear, midway
1
Turn variable condenser (CV1)
shaft fully to the arrow direction
(ant1-clok wise).
shaft fully to the arrow direction
(ant1-clok wise).
Note: Make sure that two tuning capacitor gears
are meshing with the midway gear.
gear, midway
triangle mark
triangle mark
3
screw (B2.6
×
5)
Note: Secure screw.
5
screw (BTP3
×
12)
4
holder (gear)
2
gear (tuning capacitor)
Including “spring (gear)”,
“gear (B), tuning capacitor”.
Including “spring (gear)”,
“gear (B), tuning capacitor”.
Note: Adjust so that the triangle
marked is at the position
shown and install.
shown and install.
(
)
gear (tuning capacitor)
1
Insert the spring (gear)
into a hole in the gear
(tuning capacitor).
into a hole in the gear
(tuning capacitor).
2
Fit the tuning capacitor gear (B)
to the gear (tuning capacitor),
and then turn the tuning capacitor gear (B)
in the
to the gear (tuning capacitor),
and then turn the tuning capacitor gear (B)
in the
A
direction.
A
3
Engage the spring (gear)
to the hook of the tuning
capacitor gear (B) as shown.
to the hook of the tuning
capacitor gear (B) as shown.
hook
spring (gear)
Click on the first or last page to see other ICF-J1 service manuals if exist.