Read Sony ICF-CDK50 Service Manual online
ICF-CDK50
10
SECTION 4
TEST MODE
TEST OF LCD, LED AND KEY
Mode that test LCD, LED and key.
Procedure:
1. Press three keys of the [OFF], [PRESET 1] and [MEGA BASS] simultaneously. Then turn the power on.
2. Version number of the microcomputer is displayed when entering the mode.
3. All segments light when [TIMER PUSH START/STOP] is pressed.
4. When the key is pressed, the segment corresponding to the key is turned off. Refer to the fi gure below for the correspondence of the key
Mode that test LCD, LED and key.
Procedure:
1. Press three keys of the [OFF], [PRESET 1] and [MEGA BASS] simultaneously. Then turn the power on.
2. Version number of the microcomputer is displayed when entering the mode.
3. All segments light when [TIMER PUSH START/STOP] is pressed.
4. When the key is pressed, the segment corresponding to the key is turned off. Refer to the fi gure below for the correspondence of the key
and the segment.
5. After all keys are pushed, [TIMER PUSH START/STOP] is pushed again. Test mode is ended, and reset start is done.
CD TEST MODE
Procedure:
1. Turn the power on.
2. Insert the CD, and play it.
3. Set the test mode by momentarily shorting both of TP410 ties to TP411 on the LCD board. (The message “002 88” is displayed on the
Procedure:
1. Turn the power on.
2. Insert the CD, and play it.
3. Set the test mode by momentarily shorting both of TP410 ties to TP411 on the LCD board. (The message “002 88” is displayed on the
liquid crystal display)
4. Operate it referring to the fi gure of next page.
KEY
SEGMENT (LED is contained)
KEY
SEGMENT
CLOCK
FM2,FM1,RADIO,0C,0B,ST,
MODE
3D,3C,3B,AUDIO IN
Z
OPEN/CLOSE
3E,3G,3F,3A,TIMER-LED,
AUDIO IN
4E,4G,4F,4A
PRESET-1
PM,AM,FM MONO,MEGABASS, TUNE/TRACK .
4D,4C,4B,SHUF
PRESET-2
1E,1G,1F,1A
TUNE/TRACK >
KHz,MHz,
,1
PRESET-3
1D,1C,1B
PLAY/PAUSE
5E,5G,5F,5A
PRESET-4
2E,2G,2F,2A
OFF x
5D,5C,5B,
PRESET-5
2D,2C,2B,
RADIO/BAND
6E,6G,6F,6A
MEGABASS
DOT,COL,
,CD
TIME ZONE
6D,6C,6B,
Click on the first or last page to see other ICF-CDK50 service manuals if exist.