ICF-CD823L - Sony Audio Service Manual (repair manual). Page 4

— 4 —

1 Set the alarm setting dial to ALARM

2 Plug in the clock radio.

The display will flash “AM 12:00” or “0:00”.

3 Press CLOCK for a few seconds.

You will hear a beep and the year will start to
flash in the display.

4 Press CLOCK + or – until the correct

year appears in the display.

5 Press CLOCK once.

6 Repeat steps 4 and 5 to set the month,

day, hour, and minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will
hear two short beeps.

• To display the year and date, press SNOOZE/

DATE/SLEEP OFF once for the date, and within
2 seconds press it again for the year. The
display shows the date or year for a few
seconds and then changes back to the current
time.

• To set the current time rapidly, hold down

CLOCK + or –.

• The clock system varies depending on the

model you own.
12-hour system: “AM 12:00” = midnight
24-hour system: “0:00” = midnight

• In step 6, when you press CLOCK after the

minute setting to activate the clock, the seconds
start counting from zero.

• When the alarm setting dial is set to ALARM

TIME SET A or B, the clock cannot be set.

To change the display to the
daylight saving time (summer time)
indication
Press D.S.T./SUMMER T.
“s” is displayed and the time indication
changes to summer time.
To deactivate the summer time function, press
D.S.T./SUMMER T. again.

This section is extracted from
instruction manual.