Read Sony ICD-UX60 / ICD-UX70 / ICD-UX80 Service Manual online
ICD-UX60/UX70/UX80
10
5. Beep
Test to Beep.
Test to Beep.
[PLAY]: 800 Hz t 1.3 kHz t 2.0 kHz t 800 Hz ......
[STOP]: STOP
6. Lcd Cont
Adjust the LCD contrast.
* Make a mental note of the setting even when the battery has been
Adjust the LCD contrast.
* Make a mental note of the setting even when the battery has been
removed.
Initial value: 36
[FF]: +
[FR]: –
[FF]: +
[FR]: –
7. RTC Int
Perform a self- test on RTC.
Perform a self- test on RTC.
The count is indicated every second.
8. Battery
Check the current value of Battery A/D.
Check the current value of Battery A/D.
9. Batt AB4
Check the current value of Battery x4A/D.
Check the current value of Battery x4A/D.
10. VBUS TEST
Check the presence of VBUS.
Check the presence of VBUS.
[PLAY]: Suspend, LCD off
To reset, remove the battery and then insert it again.
To reset, remove the battery and then insert it again.
11. MENU INIT
Initialize the set values.
Initialize the set values.
[PLAY]: Menu initialize start.
12. Sleep
Perform a sleep test.
The LCD display disappears and then the sleep mode is entered.
To exit the sleep mode, turn off power.
Perform a sleep test.
The LCD display disappears and then the sleep mode is entered.
To exit the sleep mode, turn off power.
LCD display
<LCD Cont>
Value: 36
[FF] + [FR]
Value: 36
[FF] + [FR]
−
LCD display
<RTC lnt>
01s
RTC lnt OK
01s
RTC lnt OK
LCD display
<VBUS Test>
VBUS ON / OFF
VBUS ON / OFF
LCD display
<Menu lnit>
[PLAY]: ENTER
[PLAY]: ENTER
Click on the first or last page to see other ICD-UX60 / ICD-UX70 / ICD-UX80 service manuals if exist.