Read Sony ICD-U50 / ICD-U60 / ICD-U70 Service Manual online
3
ICD-U50/U60/U70
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Index to Parts and Controls
x
Main Unit
i
(headphone) jack*
1
A-B
(repeat) button
Control key*
2
/MENU button
Front
REC (record)/
PAUSE button
PAUSE button
STOP button
Display window
USB cap
Built-in
microphone
microphone
Rear
Neck strap holder*
3
OPR (operation) indicator
HOLD switch*
4
Battery compartment
DPC switch
Speaker
This unit does not have a power on/off switch.
*
1
Connect stereo headphone(s) or stereo ear receiver
to the
i
(headphone) jack. If noise is heard, wipe
the headphone/ear receiver plug.
*
2
How to use the control key
Use the key to change the menu settings as well as
for playback. In the menu mode press the key right or
left to select a menu item and press the key (
for playback. In the menu mode press the key right or
left to select a menu item and press the key (
NX
)
to confi rm the setting.
*
3
How to attach the neck strap
*
4
Slide the HOLD switch in the direction of the arrow,
and all the functions of all the buttons are locked.
When the HOLD function is activated during stop, the
display will be turned off, too.
When the HOLD function is activated during stop, the
display will be turned off, too.
x
Display Window
Folder indicator (A, B, C, D, E, )/Message number/REC (recording) indicator/Recording time indication/
Remaining memory indicator/Total number of messages in a folder/Menu indication/Counter/Remaining time
indication/Recording date indication/Current time indication
Remaining memory indicator/Total number of messages in a folder/Menu indication/Counter/Remaining time
indication/Recording date indication/Current time indication
Repeat play indicator
Playback mode indicator
Recording mode
indicator
indicator
VOR indicator
Microphone sensitivity indicator
Remaining battery indicator
When recording or playback stops, the display changes from counter to current time, and then disappears
in 30 seconds.
in 30 seconds.
x
Setting the Clock
You must set the clock to record the date and time.
1
Press and hold
/MENU for more than
1 second.
The unit enters the menu mode.
2
Press the control key toward
>
to
display “DATE & TIME>” and press
NX
.
The clock setting display appears.
3
Press the control key toward
>
to
select the digits of the year and press
NX
.
4
Set the month, day, hour and minute in
sequence, then press
NX
.
When the minute digits are selected, the clock
will be set and the display will return to “DATE
& TIME>.”
will be set and the display will return to “DATE
& TIME>.”
5
Press STOP to exit from the menu
mode.
Click on the first or last page to see other ICD-U50 / ICD-U60 / ICD-U70 service manuals if exist.