Read Sony ICD-SX46VTP Service Manual online
4
ICD-SX46VTP
Step 2: Setting the Clock
You need to set the clock to use the alarm function or record the date and time.
Clock setting display appears when you insert batteries for the first time, or
when you insert batteries after the unit has been without batteries for a certain
period of time. In this case, proceed from step 4.
Clock setting display appears when you insert batteries for the first time, or
when you insert batteries after the unit has been without batteries for a certain
period of time. In this case, proceed from step 4.
Jog lever
Press the center
(x•B).
(x•B).
Press up (>).
Press down (.).
Turn toward MENU.
Note on setting the clock
Set the clock while the unit is in the
stop mode.
stop mode.
1
Turn the jog lever toward MENU.
The menu mode will be displayed in
the display window
The menu mode will be displayed in
the display window
2
Press the jog lever up or down
(>/.) to select “SET DATE”.
(>/.) to select “SET DATE”.
3
Press the jog lever (x•B).
The date and time setting window is
displayed. The year digits will flash.
The date and time setting window is
displayed. The year digits will flash.
4
Set the date.
1
Press the jog lever up or down
(>/.) to select the digits of
the year.
(>/.) to select the digits of
the year.
2
Press the jog lever (x•B).
The month digits will flash.
The month digits will flash.
3
Set the month and day in sequence,
then press the jog lever (x•B).
The hour digits will flash.
then press the jog lever (x•B).
The hour digits will flash.
v
5
Set the time.
1
Press the jog lever up or down
(>/.) to select the digits of
the hour.
(>/.) to select the digits of
the hour.
2
Press the jog lever (x•B).
The minute digits will flash.
The minute digits will flash.
3
Set the minute.
4
Press the jog lever (x•B).
The menu mode will be displayed
again.
The menu mode will be displayed
again.
Note
If you do not press the jog lever (x•B) for more than one minute, the clock
setting mode is cancelled and the window will return to normal display.
setting mode is cancelled and the window will return to normal display.
6
Turn the jog lever toward MENU.
The window will return to normal
display.
The window will return to normal
display.
1
If the unit is left unused for more than 3
seconds in the stop mode after the clock
is set, the display will show the current
time.
seconds in the stop mode after the clock
is set, the display will show the current
time.
Click on the first or last page to see other ICD-SX46VTP service manuals if exist.