Read Sony ICD-SX1000 / ICD-SX733 / ICD-SX733D / ICD-SX734 Service Manual online
ICD-SX733/SX733D/SX734/SX1000
4
2. While pressing the [VOL –] and [TRACK MARK] keys, slide
the [DPC (SPEED)/KEY CTRL] switch to ON or OFF (Either
ON or OFF is OK).
ON or OFF is OK).
TRACK
MARK
MARK
DPC (SPEED)/
KEY CTRL
KEY CTRL
VOL –
3. Slide the [DPC (SPEED)/KEY CTRL] switch in the direction
opposite to that specifi ed in step 2. while pressing the [VOL –]
and [TRACK MARK] keys at the same time.
and [TRACK MARK] keys at the same time.
4. Slide the [DPC (SPEED)/KEY CTRL] switch in the direction
opposite to that specifi ed in step 3. while pressing the [VOL –]
and [TRACK MARK] keys at the same time.
and [TRACK MARK] keys at the same time.
5. The test mode menu is displayed, and enter the test mode. Re-
lease the [VOL –] and [TRACK MARK] keys.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<Version>
<Sleep>
<Off Deep Sleep>
<Power Down>
<LCD Contrast>
<Off Deep Sleep>
<Power Down>
<LCD Contrast>
LCD Display
X / x / [ENT]
B
6. Press the [
v
] or [
V
] keys to select the “Version”, and press the
[
N
] key.
7. Confi rm that the destination has been changed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<Version>
ICD-SX733 U
ARM 1.00.00
OMF 4.11.63
SYS 20111129B
ICD-SX733 U
ARM 1.00.00
OMF 4.11.63
SYS 20111129B
LCD Display
C / c [Stop]:Ret
Model name/Destination
8. Press the [STOP/
x
] key, return to test mode menu.
9. Press
the
[
v
] or [
V
] keys to select the “Factory Ship”, and press
the [
N
] key.
10. Press the [
N
] key again, and the initialization is performed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<Factory Ship>
Execute...
LCD Display
11. This unit is reboots, then the “Set Date&Time?” confi rmation
message appears.
ABOUT THE DESTINATION SETTING WHEN REPLAC-
ING THE MAIN BOARD
When the MAIN board of this unit is replaced, perform processing
according to the following procedure.
ING THE MAIN BOARD
When the MAIN board of this unit is replaced, perform processing
according to the following procedure.
Precaution
The contents which are not opened to customers are included
in the following procedure. After you are cautious of handling of
information, execute work under the suffi cient administration.
The contents which are not opened to customers are included
in the following procedure. After you are cautious of handling of
information, execute work under the suffi cient administration.
1. About the preparing of tools
Download the tools used by this work from the homepage of TISS.
When the tools cannot be confi rmed by TISS, confi rm to the ser-
vice headquarters.
Download the tools used by this work from the homepage of TISS.
When the tools cannot be confi rmed by TISS, confi rm to the ser-
vice headquarters.
2. Setting
method
Note: The destination setting is impossible when battery voltage is not
enough.
Do perform after charging a battery.
Procedure:
1. Connect this unit to the PC.
1. Connect this unit to the PC.
PC
To USB port of PC
IC recorder
2. On PC, unzip the model setting fi le to get folder on PC.
3. On PC, open the unzipped folder, and select the folder corre-
3. On PC, open the unzipped folder, and select the folder corre-
sponding to the model name and destination of this unit.
4. On PC, copy the “LOCAL.UPG” fi le included in the folder
selected at step 4 to root folder of this unit.
5. Remove this unit from the PC.
PC
From USB port of PC
IC recorder
6. This unit is rebooted automatically.
7. The destination setting is completed.
7. The destination setting is completed.
3. Confi rmation and initialize method
Procedure:
1. Slide the [POWER ON/OFF•HOLD] switch in the direction of
Procedure:
1. Slide the [POWER ON/OFF•HOLD] switch in the direction of
“POWER” until the window display appears.
Click on the first or last page to see other ICD-SX1000 / ICD-SX733 / ICD-SX733D / ICD-SX734 service manuals if exist.