Read Sony ICD-MS1 Service Manual online
– 15 –
AUDIO BOARD, “MICROPHONE UNIT, BACK ELECTRET” (MIC161)
Note:
Follow the assembly procedure in the numerical order given.
INSTALLATION BACK ELECTRET MICROPHONE UNIT (MIC161)
Note:
On installation AUDIO board, adjust S161, S761,
S763, S764 and knobs (HOLD, DBB)
7
“microphone unit, back electret” (MIC161)
3
guide (PWB)
1
Raise the
microphone cushion.
microphone cushion.
2
claw
8
AUDIO board
6
Remove two solders of the
back electret microphone unit
lead wires (MIC161).
back electret microphone unit
lead wires (MIC161).
5
claw
4
window (LED)
three knobs (DBB)
knob (HOLD)
S161
S763
S764
S761
#
guide (PWB)
bosses
slot
boss
guide (PWB)
2
Install the back electret microphone
unit (MIC161), aligning with three bosses.
unit (MIC161), aligning with three bosses.
Note: Take care not to allow the lead wires
to ride on the
!
portion.
1
Put two lead wires
in the slot of the guide (PWB).
in the slot of the guide (PWB).
3
Let excess lead wires
through the guide (PWB)
in the arrow direction.
through the guide (PWB)
in the arrow direction.
Click on the first or last page to see other ICD-MS1 service manuals if exist.