Read Sony ICD-MS1 Service Manual online
– 12 –
• This set can be disassembled in the order shown below.
SECTION 3
DISASSEMBLY
Set
Lid Assy, Upper
Eject Mech Assy
Audio Board,
“Microphone Unit, Back Electret” (MIC161)
“Microphone Unit, Back Electret” (MIC161)
Main/SW Board
Case Assy
Connector Unit, MS
3
tapping screw
2
Open the battery case lid.
1
screw
(B1.7
(B1.7
×
12)
6
lid assy, upper
5
Remove two solders of the
speaker lead wires (SP161).
speaker lead wires (SP161).
speaker lead wires
4
claw
fabric non woven (RE)
fabric non woven (RE)
7
case assy
4
two claws
4
two
claws
claws
Note: In routing the speaker lead wires,
fix them to the positions shown in figure
using three pieces of fabric non woven (RE).
using three pieces of fabric non woven (RE).
Note:
Follow the disassembly procedure in the numerical order given.
“LID ASSY, UPPER”, CASE ASSY
Click on the first or last page to see other ICD-MS1 service manuals if exist.