Read Sony ICD-LX30 Service Manual online
ICD-LX30
2
On the AC adaptor
Trademarks
Connect the AC
adaptor to an
easily
accessible wall
outlet close by.
If trouble
occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall
outlet.
easily
accessible wall
outlet close by.
If trouble
occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall
outlet.
Do not use the AC adaptor placed in a
narrow space, such as between a wall
and furniture.
and furniture.
To reduce the risk of electrical shock,
avoid placing the AC adaptor in a
location subject to humidity.
location subject to humidity.
Polarity of the plug
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
SD, SDHC microSD and microSDHC logos are
trademarks of SD-3C, LLC.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
SECTION 1
SERVICING NOTES
ABOUT THE BOARDS REPLACING
When the boards installed in this unit are defective, exchange the
complete mounted board.
However some mounted parts are exchangeable. Refer to “4. EX-
PLODED VIEWS” (page 13) for exchangeable mounted parts.
When the boards installed in this unit are defective, exchange the
complete mounted board.
However some mounted parts are exchangeable. Refer to “4. EX-
PLODED VIEWS” (page 13) for exchangeable mounted parts.
ABOUT THE DESTINATION SETTING WHEN REPLAC-
ING THE MAIN BOARD
When the MAIN board of this unit is replaced, perform processing
according to the following procedure.
ING THE MAIN BOARD
When the MAIN board of this unit is replaced, perform processing
according to the following procedure.
Note: The contents which are not opened to customers are in-
cluded in the following procedure. After you are cautious of
handling of information, execute work under the suffi cient
administration.
handling of information, execute work under the suffi cient
administration.
1. About the preparing of fi les
Download the fi les used by this work from the homepage of TISS.
When the fi les cannot be confi rmed by TISS, confi rm to the service
headquarters.
Download the fi les used by this work from the homepage of TISS.
When the fi les cannot be confi rmed by TISS, confi rm to the service
headquarters.
2. Setting
method
Do work in the state before assembling the MAIN board to main
unit.
Procedure:
unit.
Procedure:
Note 1: Release the lock switch of SD card. When update is completed
where the lock switch is released, the model setting fi le is deleted
automatically.
automatically.
1. Unzip the model setting fi le on PC.
2 Open the folder of model setting fi le, and choose the folder
2 Open the folder of model setting fi le, and choose the folder
which suits the following conditions out of it.
Folder selection condition
Destination
Folder name
US
ICD-LX30_U(U2)
Canadian
ICD-LX30_CA(CA2)
AEP
ICD-LX30_CE7(CEKCED)
UK
E
ICD-LX30_E
Korean
ICD-LX30_KR3(KR4)
Chinese
ICD-LX30_CN(CNA)
3. Insert SD card in PC.
4. Copy
4. Copy
the
“DEVINFO.UPG”
fi le included in the folder selected
at step 2 to SD card, and remove SD card from PC
5. Insert SD card to the card slot on the MAIN board.
– MAIN Board (Side A) –
card slot
SD card
Ver. 1.1
Click on the first or last page to see other ICD-LX30 service manuals if exist.