Read Sony ICD-BM1 / ICD-BM1PRO Service Manual online
8
ICD-BM1/BM1PRO
Basic Operations
23
GB
1
When you play back to the end of the last message
When the unit locates the end of the last message, “MSG. END” flashes 3 times
with a beep and the OPR indicator lights in green.
• When “MOVE CONTROL KEY TO STOP POSITION” appears, slide the
with a beep and the OPR indicator lights in green.
• When “MOVE CONTROL KEY TO STOP POSITION” appears, slide the
control key to STOP. The unit will stop at the end of the last message.
• To go back to the beginning of the first message in a folder during stop mode,
press the jog lever up (
>
).
• If you slide the control key to B.SPACE or keep pressing the jog lever down
(
.
), the messages are played back rapidly, and normal playback will start
at the point you release the button.
• If the last message is long and you wish to start playback at a later part of the
message, keep pressing the jog lever up (
>
) to go to the end of the message
and then press the jog lever down (
.
) to go back to the desired point.
Quickly locating the point at which you wish to start
playback (Easy Search)
playback (Easy Search)
When EASY-S is set to ON (page 51) in the menu, you can quickly locate
the point you wish to start playback by pressing the jog lever up or down
(
the point you wish to start playback by pressing the jog lever up or down
(
>/.
) repeatedly during playback.
You can go back approximately 3 seconds by pressing the jog lever down
(
(
.
) once, or advance approximately 10 seconds by pressing the jog lever
up (
>
) once. This function is useful when locating a desired point in a
long recording.
Playing back a message repeatedly — Repeat Play
When REPEAT is set to ON in the menu (page 50),
you can play back a message repeatedly.
Slide the control key to PLAY. “MSG.REPEAT“
will be displayed and the selected message will be
played back repeatedly.
To stop playback, slide the control key to STOP.
To resume normal playback, set REPEAT to OFF in
the menu.
you can play back a message repeatedly.
Slide the control key to PLAY. “MSG.REPEAT“
will be displayed and the selected message will be
played back repeatedly.
To stop playback, slide the control key to STOP.
To resume normal playback, set REPEAT to OFF in
the menu.
28
GB
Before erasing
After erasing
Remaining messages are renumbered.
B
Editing Messages
Erasing Messages
You can erase the recorded messages one by one or all messages in a folder
at a time.
at a time.
Note
Once a recording has been erased, you cannot retrieve it.
Erasing Messages one by one
Be sure to erase unnecessary messages only.
When a message is erased, the remaining messages will advance and be
renumbered so that there will be no space between messages.
When a message is erased, the remaining messages will advance and be
renumbered so that there will be no space between messages.
ERASE
FOLDER
ENTER
CANCEL
Erase Message 3
Message 1 Message 2 Message 3 Message 4 Message 5
Message 1 Message 2 Message 3 Message 4
Jog lever (>/.)
Editing Messa
g
e
s
29
GB
1
Press ERASE while playing back the
message you want to erase or press
ERASE for more than 1 second during
stop mode.
message you want to erase or press
ERASE for more than 1 second during
stop mode.
“ERASE?” will flash while the first and last 5
seconds of the message are played back 10
times.
seconds of the message are played back 10
times.
2
Press ENTER while the message is being
played back and “ERASE” is flashing.
played back and “ERASE” is flashing.
The message is erased and the remaining
messages will be renumbered. (For example, if
you erase Message 3, Message 4 will be
renumbered as Message 3. When erasing is
completed, the unit will stop at the current
position.)
messages will be renumbered. (For example, if
you erase Message 3, Message 4 will be
renumbered as Message 3. When erasing is
completed, the unit will stop at the current
position.)
To cancel erasing
Press CANCEL before step 2.
To erase other messages
Repeat steps 1 and 2.
To erase a message partially
First divide the message (see page 31) and then follow the steps on this
page to erase the message.
Continued
30
GB
Erasing Messages (Continued)
Erasing All Messages in a Folder
You can erase all recorded messages in a folder.
1
Select the folder containing the messages you want to erase.
For information on selecting a folder, see step 2 of "Recording
Messages" on page 13.
Messages" on page 13.
2
While pressing FOLDER, press ERASE for
more than 1 second.
more than 1 second.
“ERASE ALL?” will flash for 10 seconds.
If no messages are recorded in a folder
“ERASE FOLDER?” will flash and you can erase
the folder itself (see page 34).
the folder itself (see page 34).
3
While “ERASE ALL?” is flashing, press
ENTER.
ENTER.
All the recorded messages contained in the
folder are erased. The folder itself will not be
deleted. For how to erase a folder, see page 34.
folder are erased. The folder itself will not be
deleted. For how to erase a folder, see page 34.
To cancel erasing
Press CANCEL before step 3.
Click on the first or last page to see other ICD-BM1 / ICD-BM1PRO service manuals if exist.