ICD-B600 (serv.man2) - Sony Audio Service Manual (repair manual). Page 7

Sensitivity H

HOLD

ON

OFF

Sensitivity L

HOLD

To change the sensitivity again, press the [

x

] buttonn and change 

the [HOLD] switch.
In a DSP Test mode, changing the mode and changing the sensitiv-
ity require the [

x

] button be pressed.

5-5.  RESET  MENU
To enter the RESET MENU test, press the [DIVIDE] button.
When all of the buttons or controls located on the set are operated, 
the system shows “Ok” if all of them are normally operated.
An operation of a switch is indicated by the number for verifi cation 
in order to make a simple indication.

Note 1: When 10 different operations of the switches are normally made 

in any order (regardless of the order that pushbuttons are pressed 
and the slide switch is set to ON and OFF), the system shows 
“Ok”.

Note 2: Clear memory when “ACCESS” is blinking on the display. (Do 

this before “Ok” is shown.) To exit from this menu, the power has 
to be turned off (battery to be removed).

S

S

Press  DIVIDE  button.

Indication after  DIVIDE 
button is pressed.

Indication after DISPLAY/MENU
button is pressed.

Indication after [9 REC

button is pressed.

Indication after  HOLD  is 
set to OFF.

Indication after  HOLD  is 
set to ON.

UIf any key is not pressed,

 

the system waits for the key

 

to be pressed.

Clear memory when “ACCESS” is
blinking on the display.
The system shows “Ok”. 

••••••

S

S

S