Read Sony HT-XT1 Service Manual online
HT-XT1
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.02
New
1.1
2014.06
Addition of Singapore model
Addition of CUSHION (GLASS)
Addition of notes for glass assy removal on DISASSEMBLY
(SMR-14012)
1.2
2014.08
Change of Part No. for GRILL ASSY (Ref. No. 1)
Addition of CUSHION (GLASS) (8 pieces, 1 set) (Ref. No. 9)
(SMR-14021)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.