HT-SL5, STR-KSL5 - Sony Audio Service Manual (repair manual). Page 4

4

* All preset contents are reset to the default setting.
* Procedure:

While depressing the  VIDEO  and the  PLII  buttons
simultaneously, press the power  ?/1  button to turn on the main
power.  The message “FACTORY” appears and switch off the set.
Press the power  ?/1  button again, and the present contents are
reset to the default values.

* Either the micro speaker mode or normal speaker mode can be

selected.

* Procedure

While depressing the  MUTING  button, press the power  ?/1
button to turn on the main power. Either the message “MICRO
SP.” or “NORM. SP.” appears. Select the desired mode.

* The preset sound field is cleared when this mode is activated.

Use this mode before returning the product to clients upon
completion of repair.

* Procedure:

While depressing the  SOUND FIELD  button, press the power
 ?/1  button to turn on the main power.  The message
“S. F. CLR” appears and initialization is performed.

* The all preset value is cleared when this mode is activated.
* Procedure :

While depressing the  VIDEO  and the  SOUND FIELD  buttons
simultaneously, press the power  ?/1  button to turn on the main
power. The message “INITIAL” appears and clear all preset value.

* Either the fan auto mode or fan on mode can be selected.
* Procedure:

While depressing the  PLII  button, press the power  ?/1  button.
Either the message “FAN AUTO” or “FAN ON” appears. Select
the desired mode.

* The software version is displayed.
* Procedure:

While depressing the  VIDEO  and the  MUTING  buttons
simultaneously, press the power  ?/1  button to turn on the main
power.  The model name, destination and the software version are
displayed.

* Button check
* Procedure:

While depressing the DVD and the MUTING buttons
simultaneously, press the power  ?/1  button to turn on the main
power.
“REST 09” appears.
Every pressing of any button other than  ?/1  counts down the
buttons.  The buttons which are already counted once are not
counted again.  When all buttons are pressed “REST 00” appears.

* All fluorescent segments are tested.  When this test is activated,

all segments turn on at the same time, then each segment turns on
one after another.

* Procedure:

While depressing the   DVD   and the   PLII   buttons simultaneously,
press the power  ?/1  button to turn on the main power.

1. All segments turn on.

VIDEO ,  DVD ,  TV/SAT  and  TUNER FM/AM  LED turn on.

2. Press the  VIDEO  button, confirm display

VIDEO , and  TUNER FM/AM  LED turn on.

3. Press the  VIDEO  button, confirm display

DVD  and  TV/SAT  LED turn on.

4. Press the  VIDEO  button, all segments turn off.

5. Every pressing of the VIDEO button turns on each segment and

LED one after another in the same order.
(Not only the VIDEO button, but also the other buttons such as
DVD ,  TV/SAT ,  TUNER FM/AM  can be used.)

* Tuner check
* Procedure :

While depressing the  TUNER FM/AM  and the  MUTING
buttons simultaneously, press the power  ?/1  button to turn on
the main power. TUN CHK appears and the tuner checking is
performed.

* DSP tests are performed.
* Procedure :

There are two different methods to enter the test mode.

(1) While depressing the  DVD  and  SOUND FIELD  buttons

simultaneously, press the power  ?/1    button to turn on the
main power.

(2) When the set is turned on, by using the remote controller, press

Cursor button three times, then press the  MAIN MENU  button
one time and thenpress the  MUTING  button one time.

• Select the item by pressing Cursor button ( 

V  or  v ).

• Select the function by pressing Cursor button ( 

B  or  b ).

L

SW

SL

SR

SSB

C

R

 L F E

OPT COAX MULTI CH IN 12

MEMORY

SLEEP

RDS

MONO

STEREO

EQ

D.RANGE

dB

kHz

mft.

MHz

SP SP A SP B

DIGITAL EX

PRO LOGIC II DTS-ES NEO : 6 MPEG-2 AAC

L

SL

SR

R

COAX

1

MEMORY

MONO

EQ

D.RANGE

dB

  Hz
   ft.

SP A SP B

EX

II

-ES NEO : 6 

-2

SW

SSB

C

 L F E

OPT

MULTI CH IN  2

SLEEP

RDS

STEREO

k

m

MHz

SP

DIGITAL PRO 

LOGIC DTS

MPEG

AAC