Read Sony HT-RT5 Service Manual online
HT-RT5
6
2. Checking method of wireless LAN operation
Necessary Equipment:
•
•
Access point supporting WPS
Procedure:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
@
/1
] button to turn the power on.
3. Press the [HOME] button on the remote commander, display
the home screen.
4. Press the [
V]/[v] buttons on the remote commander to select
the “Setup”, and press the [ ] button on the remote command-
er.
er.
5. Press the [
V]/[v] buttons on the remote commander to select
the “Network Settings”, and press the [ ] button on the remote
commander.
commander.
6. Press the [
V]/[v] buttons on the remote commander to select
the “Internet Settings”, and press the [ ] button on the remote
commander.
commander.
7. Press the [
V]/[v] buttons on the remote commander to select
the “Wireless Setup(built-in)”, and press the [
b] button on the
remote commander.
8. Press the [
V]/[v] buttons on the remote commander to select
the “Wi-Fi Protected Setup (WPS)”, and press the [
b] button
on the remote commander.
9. The “Start” screen is display, and press the [WPS] key on the
access point.
10. Press the [
b] button on the remote commander, setup is start.
11. The message “Next, check the network connection” is dis-
played, and when wireless LAN connection is completed,
“Wireless Connection: OK” and “Internet Access: OK” is dis-
played.
“Wireless Connection: OK” and “Internet Access: OK” is dis-
played.
Note: Refer to the instruction manual about details of the setting method.
3. Checking method of wired LAN operation
Necessary Equipment:
• Router
•
• Router
•
Network LAN cable
Procedure:
1. Connect this unit with TV monitor.
2. Connect the unit to the router with the network LAN cable.
3. Press the [
1. Connect this unit with TV monitor.
2. Connect the unit to the router with the network LAN cable.
3. Press the [
@
/1
] button to turn the power on.
4. Press the [HOME] button on the remote commander, display
the home screen.
5. Press the [
V]/[v] buttons on the remote commander to select
the “Setup”, and press the [ ] button on the remote command-
er.
er.
6. Press the [
V]/[v] buttons on the remote commander to select
the “Network Settings”, and press the [ ] button on the remote
commander.
commander.
7. Press the [
V]/[v] buttons on the remote commander to select
the “Internet Settings”, and press the [ ] button on the remote
commander.
commander.
8. Press the [
V]/[v] buttons on the remote commander to select
the “Wired Setup”, and press the [
b] button on the remote
commander.
9. Press the [
V]/[v] buttons on the remote commander to select
the “Auto”, and press the [
b] button on the remote command-
er.
10. The “The network will be confi gured with the following set-
tings” screen is display, and press the [
b] button on the remote
commander.
11. Press the [
V]/[v] buttons on the remote commander to select
the “Save & Connect”, and press the [ ] button on the remote
commander.
commander.
12. When wired LAN connection is completed, “Physical Connec-
tion: OK” and “Internet Access: OK” is displayed.
Note: Refer to the instruction manual about details of the setting method.
4. Checking method of NFC operation
Necessary Equipment:
Smartphones, tablets, or music players with the NFC function
built-in
(OS: Android™ 2.3.3 or later, excluding Android 3.x)
Smartphones, tablets, or music players with the NFC function
built-in
(OS: Android™ 2.3.3 or later, excluding Android 3.x)
Procedure:
1. Press the [
1. Press the [
@
/1
] button to turn the power on.
2. Touch the N mark of the Bar Speaker with the Bluetooth de-
vice.
– Front view –
Bluetooth indicator (blue)
3. Make sure that the indicator (blue) of the Bar Speaker lights
up. (This indicates that a connection has been established)
4. Start playback of an audio source on the Bluetooth device.
Note: After checking of NFC operation, be sure to delete the pairing infor-
mation before returning this unit to the customer.
5. Factory initialize
It returns all settings to the initial state of factory shipment.
It returns all settings to the initial state of factory shipment.
Note 1: Disconnect the following connections when you use this mode.
USB
LAN
HDMI IN 1
HDMI IN 2
HDMI IN 3
Note 2: The operation in this mode must use a remote commander and TV
monitor.
Procedure:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press the [HOME] button on the remote commander, and the
home menu is displayed.
4. Press the [
V]/[v] buttons on the remote commander to select
the “Setup”, and press the [ ] button on the remote command-
er.
er.
5. Press the [
V]/[v] buttons on the remote commander to select
the “Resetting”, and press the [ ] button on the remote com-
mander.
mander.
Setup
Resetting
Easy Network Settings
Easy Setup
Input Skip Setting
– Continued on next page –
Click on the first or last page to see other HT-RT5 service manuals if exist.