Read Sony HT-DDWG700 / STR-KG700 Service Manual online
STR-KG700
12
SECTION 2
TEST MODE
SOUND FIELD CLEAR MODE
The preset sound fi eld is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
The preset sound fi eld is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
button, press the power
button to turn on the main power.
2. The message “S.F. CLR.” appears and initialization is
performed.
performed.
SOFTWARE VERSION DISPLAY MODE
The software version is displayed.
Procedure:
The software version is displayed.
Procedure:
1. While pressing the
and the
buttons simultaneously, press the power
button to
turn on the main power.
2. The model name, destination and the software version are
displayed.
displayed.
KEY CHECK MODE
Button check
Procedure:
Button check
Procedure:
1. While pressing the
and the
buttons simultaneously, press the power
button to
turn on the main power.
“REST 08” appears.
2. Every pressing of any button other than
counts down
the buttons. The buttons which are already counted once
are not counted again.
are not counted again.
3. When all buttons are pressed “REST 00” appears.
FLUORESCENT INDICATOR TUBE TEST MODE
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on
one after another.
Procedure:
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on
one after another.
Procedure:
1. While pressing the
and the
buttons simultaneously, press the power
button to
turn on the main power.
2. All segments turn on.
3. Turn the
knob.
4. Turn the
knob once again.
5. Turn the
knob once again. All
segments turn off.
6. Every turning of the
knob turns on
each segment one after another in the same order.
7. Press
or
to release test mode.
MEMORY
L
C
R
SL S SR
SB SBR
SBL
SW
LFE
SP A
SP B
SP B
CAT
NEO:6 SAT
D.RANGE
RDS ST
MONO
DTS-ES
96 / 24
HDMI COAX
D EX
OPT
PL II x
PL
dB
k Hz
mft.
MHz
LFE
SP B
NEO:6
D.RANGE
MONO
COAX
k
m
MHz
RDS
x
L
R
S
MEMORY
C
SL
SR
SB SBR
SBL
SW
CAT
DTS
D
PL
dB
Hz
ft.
ST
SWAP ALL MODE
The signal will be swapped to all channels so that all speakers
will have sound output.
Procedure:
The signal will be swapped to all channels so that all speakers
will have sound output.
Procedure:
1. While pressing the
and the
buttons
simultaneously, press the power
button to turn on the
main power.
2. “DSP TEST” appears.
3. After pressing
3. After pressing
button of remote commander
“9_DSPTST” appears.
4. Press
b to enter the DSP test mode menu.
5. Press
v twice to enter swap mode. “SWP.AUTO” appears.
6. Press
b twice again to select “SWP.ALL”.
7. Power off the set to release test mode.
SHIPMENT MODE
All preset contents are reset to the default setting.
Procedure:
Procedure:
1. While pressing the
and the
buttons
simultaneously, press the power
button to turn on the
main power.
2. After “CLEARING” appears, “CLEARED” appears and
switch off the set.
RE-BOX CLASSIFICATION TEST MODE
Procedure:
Procedure:
1. While pressing the
and the
buttons
simultaneously, press the power
button to turn on the
main power.
2. “ R.BOX [][][]xx” appears.
3. xx indicates number of times set powered on.
4. Press any button or power off the set to release test mode.
3. xx indicates number of times set powered on.
4. Press any button or power off the set to release test mode.
AM CHANNEL STEP 9 kHz/10 kHz
SELECTION MODE (US, CND)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
SELECTION MODE (US, CND)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1. Set the FUNCTION to AM. Turn off the main power.
2. While pressing the
2. While pressing the
button, press the power
button to turn on the main power.
3. Either the message “9 k STEP” or “10 k STEP” appears.
Select the desired step.
VACS CONTROL TEST MODE
The VACS feature of the amplifi er is turned off purposely.
Procedure:
The VACS feature of the amplifi er is turned off purposely.
Procedure:
1. While pressing the
and the
buttons simultaneously, press the power
button to
turn on the main power.
2. “VACS OFF” appears (8 second).
3. Power off the set to release test mode.
3. Power off the set to release test mode.
Click on the first or last page to see other HT-DDWG700 / STR-KG700 service manuals if exist.