HCD-VP700 - Sony Audio Service Manual (repair manual). Page 14

14

[CD Ship Mode (No Memory Clear)]
• This mode moves the position to the position durable to vibra-

tion Use this mode when returning the set to the customer after
repair.

Procedure:
1. Press  `/1  button to turn the set ON.
2. Press three  ENTER  ,  DISK 1  button and CD  button

simultaneously.

3. After the “STANBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator rube, and the
CD ship mode is set.

[CD Ship Mode (Memory Clear)]
• This mode moves the pickup to the position durable to vibra-

tion. Use this mode when returning the set to the customer after
repair.

Procedure:
1. Press  `/1  button to turn the set ON.
2. Press three buttons  CD  and  `/1  button simultaneously.
3. After the “STANDBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.

[CD Service Mode]
• This mode can run the CD sled motor freely. Use this mode, for

instance, when cleaning the pickup.

Procedure:
1. Press  `/1  button to turn the set ON.
2. Select the function “CD”.
3. Press three buttons  ENTER  ,  DISC 1  , and  x   simultaneously.
4. The CD service mode is selected.
5. With the CD in stop status, press  M  button to move the

pickup to outside track, or press  m  button to inside track.

6. To exit from this mode, perform as follows:

1) Move the pickup to the most inside track.
2) Press  `/1  button to turn the set OFF.

Note:
• Always move the pickup to most inside track when exiting from

this mode. Otherwise, a disc will not be unloaded.

• Do not run the sled motor excessively, otherwise the gear can

be chipped.