Read Sony HCD-RV2 / HCD-RV5 / HCD-RV6 / MHC-RV2 / MHC-RV6 Service Manual online
5
HCD-RV2/RV5/RV6
SECTION 1
SERVICE NOTE
1
Cut the fifteen melted-connection points
with a cutting plier.
3
Cut the seven melted-connection points
with a cutting plier.
2
PANEL board
4
KEY board
PANEL board
(eleven screw holes)
(eleven screw holes)
KEY board
(six screw holes)
(six screw holes)
Screw hole
In order to re-install the panel board and the key board,
fix them by using the screws (+BVTP 2.6
fix them by using the screws (+BVTP 2.6
×
8 ) respectively.
Screw in to the respective screw holes.
Do not tighten the screws excessively.
Do not tighten the screws excessively.
* The panel board and the key board only are connected to the front panel
by means of hot-melting the plastics.
by means of hot-melting the plastics.
Note for installing the panel board and the key board
REMOVING THE PANEL BOARD AND THE KEY BOARD
Hot melt
Click on the first or last page to see other HCD-RV2 / HCD-RV5 / HCD-RV6 / MHC-RV2 / MHC-RV6 service manuals if exist.