HCD-RV2, HCD-RV5, HCD-RV6, MHC-RV2, MHC-RV6 - Sony Audio Service Manual (repair manual). Page 2

Read Sony HCD-RV2 / HCD-RV5 / HCD-RV6 / MHC-RV2 / MHC-RV6 Service Manual online

2
HCD-RV2/RV5/RV6
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
0
  OR  DOTTED  LINE
WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS  WHOSE
PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  MANUAL  OR
IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
HCD-RV5/RV6:
MD/VIDEO (AUDIO) IN (phono jacks):
voltage 450/250 mV,
impedance 47 kilohms
GAME INPUT (VIDEO) (phono jack):
1 Vp-p, 75 ohms
GAME INPUT (AUDIO) (phono jack):
voltage 450 mV,
impedance 47 kilohms
MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
PHONES (stereo mini jack):
accepts headphones of
8 ohms or more
SPEAKER:
accepts impedance of 6 to
16 ohms
SURROUND SPEAKER (HCD-RV6 only)
accepts impedance of 24
ohms
MD/VIDEO (AUDIO) OUT (phono jacks):
impedance 1 kilohms
VIDEO OUT (phono jack):
1 Vp-p,
impedance 75 ohms
Disc player section
System
Compact disc and digital
audio and video system
Laser
Semiconductor laser
(
λ=780 nm)
Emission duration:
continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Wavelength
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Video color system format
NTSC, PAL
Tape deck section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM lead antenna
Antenna terminals
75 ohm unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
Middle Eastern and Philippine models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
Other models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,710 kHz (with the
interval set at 10 kHz)
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency 450 kHz
Speaker
HCD-RV2:
Speaker system
3-way, 3-unit,
bass-reflex type
Speaker units
Woofer:
13 cm, cone type
Tweeter:
5 cm, cone type
Super Tweeter:
2 cm, dome type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 200 
× 325 × 237 mm
Mass
Approx. 3.6 kg net per
speaker
Front speaker SS-RV900 for HCD-RV6/RV5:
Speaker system
3-way, 3-unit, bass-reflex
type
Speaker units
Sub Woofer:
13 cm, cone type
Woofer:
13 cm, cone type
Tweeter:
5 cm, cone type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 215 
× 356 × 285 mm
Mass
Approx. 4.5 kg net per
speaker
Surround speaker SS-RSV6 for HCD-RV6:
Speaker system
2-way, 2-unit, bass-reflex
type
Speaker units
Woofer:
10 cm, cone type
Tweeter:
5 cm, cone type
Nominal impedance
24 ohms
Dimensions (w/h/d)
Approx. 150 
× 325 × 220 mm
Mass
Approx. 2.3 kg net per
speaker
General
Power requirements
Saudi Arabian model:
120 – 127 V, 220 V or
230 – 240 V AC,
50/60 Hz
Adjustable with voltage
selector
Thai model:
220 V AC, 50/60 Hz
Other models:
120 V, 220 V or 230 –
240 V AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
HCD-RV2:
115 watts
HCD-RV5:
200 watts
HCD-RV6:
220 watts
Dimensions (w/h/d)
HCD-RV2:
Approx. 280 
× 325 × 412 mm
HCD-RV5/RV6:
Approx. 280 
× 325 × 421 mm
Mass
HCD-RV2:
Approx. 9.0 kg
HCD-RV5:
Approx. 10.0 kg
HCD-RV6:
Approx. 10.5 kg
Supplied accessories:
AM loop antenna (1)
Remote Commander (1)
Batteries (2)
FM lead antenna (1)
Speaker pads (8)
Video cable (1)
Design and specifications are subject to change without
notice.
Display
Click on the first or last page to see other HCD-RV2 / HCD-RV5 / HCD-RV6 / MHC-RV2 / MHC-RV6 service manuals if exist.
Random: