Read Sony HCD-MD1DX / HCD-MD1EX (serv.man2) Service Manual online
– 4 –
Displays the recording time in the form of “rππππππh”.
The displayed time is the total number of hours the laser is high power, which is about one-fourth of the actual
recording time. The time is displayed in decimal digits between 0h to 65535h.
recording time. The time is displayed in decimal digits between 0h to 65535h.
Displays the playback time in the form of “pππππππh”.
The displayed time is the total actual play time. The paused time is not counted. The time is displayed in
decimal digits between 0h to 65535h.
decimal digits between 0h to 65535h.
Displays the total number of retries during recording and retry errors during playback in the form of “rππpππ”.
“r” indicates the retries during recording while “p” indicates the retry errors during playback. The number of
retries is displayed in hexadecimal digits between 00 to FF.
retries is displayed in hexadecimal digits between 00 to FF.
Displays the total number of errors in the form of “total ππ”.
The number of errors is displayed in hexadecimal digits between 00 to FF.
Displays the 10 latest errors in the form of “0π E@@”.
The π indicates the history number. The smaller the number, the newer is the error. (00 is the latest error.)
The @@ indicates the error code. Refer to the following table for details. Press the
[VOLUME+/–]
button to
switch the error history.
Mode which erases all the error histories.
The error history serves as a reference for when to replace the optical pick-up. Perform this procedure when the
optical pick-up has been replaced in order to erase past error histories and not at other times. Press the
optical pick-up has been replaced in order to erase past error histories and not at other times. Press the
p (CD)
button when “er refresh??” is displayed. The history will be erased and “Complete!” will be displayed momen-
tarily. Be sure to check the following when this mode has been executed.
tarily. Be sure to check the following when this mode has been executed.
• Check that the data has been erased.
• Perform recording and playback, and check that the mechanism operates normally.
ITEM OF ERROR HISTORY MODE ITEMS AND CONTENTS
Selecting the Test Mode
Display
total rec
total play
retry err
total err
err history
er refresh?
Details of History
No error
Disc error. Cannot read PTOC
(Disc is ejected out)
Disc error. UTOC error
(Disc is not ejected out)
Loading error
Cannot read address (Servo has deviated)
Table of Error Codes
Error Code
E00
E01
E02
E03
E04
E05
E06
E07
E08
E09
E0A
FOK has deviated
Unfocused (Servo has deviated)
Recording retry
Recording retry error
Play retry error
(Access error)
Playback retry error (C2 error)
Details of Error
Error Code
Details of Error
Click on the first or last page to see other HCD-MD1DX / HCD-MD1EX (serv.man2) service manuals if exist.