Read Sony HCD-GN88D / MHC-GN88D Service Manual online
4
HCD-GN88D
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
• MODEL IDENTIFICATION
– Back Panel –
– Back Panel –
MODEL
PART No.
E3, E15 models
4-246-186-0[]
SP model
4-246-186-1[]
MY model
4-246-186-2[]
EA model
4-246-186-3[]
E51 model
4-246-186-4[]
MX model
4-246-186-5[]
TH model
4-246-186-6[]
AUS model
4-246-186-7[]
PH model
4-246-186-8[]
•
Abbreviation
AUS
AUS
: Australian model
E3
: 240 V AC Area in E model
EA
: Saudi Arabia model
E15
: Iran model
E51
: Chilean and Peruvian model
MX
: Mexican model
PH
: Philippines model
SP
: Singapore model
MY
: Malaysia model
TH
: Thai model
PART No.
DVD TRAY LOCK MODE
• This mode let you lock the disc trays. When this mode is acti-
vated, the disc tray will not open when
Z
OPEN/CLOSE
but-
ton or
[DISC SKIP/EX-CHANGE]
button is pressed. The mes-
sage “LOCKED” will be displayed in the will be displayed on
the fluorescent indicator tube.
the fluorescent indicator tube.
Procedure:
1. Press
?/1
button to turn the set ON.
2. Select DVD function.
3. Press
x
button and
Z
OPEN/CLOSE
button simultaneously
and hold down until “LOCKED” or “UNLOCKED” displayed
on the fluorescent indicator tube (around 5 seconds).
on the fluorescent indicator tube (around 5 seconds).
NOTES ON DMB03 BOARD EXCHANGE
If a DMB03 board is exchanged, “DRIVE AUTO ADJUSTMENT”
may be unable to be performed. In this case, initialize a memory in
the following procedure.
If a DMB03 board is exchanged, “DRIVE AUTO ADJUSTMENT”
may be unable to be performed. In this case, initialize a memory in
the following procedure.
1. Starting Test Mode (see Supplement-1 page 2).
2. Press the 2 button of remote commander to set the Drive
2. Press the 2 button of remote commander to set the Drive
Manual Operation (see Supplement-1 page 4).
3. Press the 6 button of remote commander to set the Memory
Check (see Supplement-1 page 6).
4. Press the [CLEAR] button of remote commander to initialize
a memory.
Ver 1.3
Click on the first or last page to see other HCD-GN88D / MHC-GN88D service manuals if exist.