Read Sony HCD-GN1200D / MHC-GN1200D Service Manual online
HCD-GN1200D
19
Procedure:
1. Press
1. Press
button to turn on the system.
2. Select DVD function.
3. Press
3. Press
Y
button, [SOUND FLASH] button and
but-
ton simultaneously during “DVD NO DISC” condition. The
system will turn off automatically.
system will turn off automatically.
4. After the “STANDBY” blinking display fi nishes, a message
“MECHA LOCK” appears on the fl uorescent indicator tube
and the DVD ship mode is set.
and the DVD ship mode is set.
5. The Memory is clear after AC Power OFF.
[DVD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable
• This mode moves the optical pick-up to the position durable
to vibration. Use this mode when returning the set to the cus-
tomer after repair.
tomer after repair.
Procedure:
1. Press
1. Press
button to turn on the system.
2. Select DVD function.
3. Press [DVD] button and
3. Press [DVD] button and
button simultaneously during
“DVD NO DISC” condition. The system will turn off auto-
matically.
matically.
4. After the “STANDBY” blinking display fi nishes, a message
“MECHA LOCK” appears on the fl uorescent indicator tube
and the DVD ship mode is set.
and the DVD ship mode is set.
[DVD TRAY LOCK MODE]
• This mode is used to lock the disc tray. When this mode is acti-
• This mode is used to lock the disc tray. When this mode is acti-
vated, the disc tray will not open when [OPEN/CLOSE] button
or [EX-CHANGE/DISC SKIP] button is pressed. The message
“LOCKED” appears on the fl uorescent indicator tube.
or [EX-CHANGE/DISC SKIP] button is pressed. The message
“LOCKED” appears on the fl uorescent indicator tube.
Procedure:
1. Press
1. Press
button to turn on the system.
2. Select DVD function.
3. Press
3. Press
Y
button and [OPEN/CLOSE] button simultaneously
and hold down until “LOCKED” or “UNLOCKED” appears
on the fl uorescent indicator tube (around 5 seconds).
on the fl uorescent indicator tube (around 5 seconds).
[TV/SAT SWITCHING]
• This mode let you switch from TV to SAT and vice-versa.
Procedure:
1. Press
• This mode let you switch from TV to SAT and vice-versa.
Procedure:
1. Press
button to turn on the system.
2. Select
TV
function.
3. Press [TV/SAT] button and
button simultaneously. The
function will change to SAT. Press the same buttons again to
change from SAT to TV.
change from SAT to TV.
[DVD COLOR SYSTEM]
• This mode let you change the color system of the video output
• This mode let you change the color system of the video output
from PAL to NTSC or vice-versa.
Procedure:
1. Press
1. Press
button to turn on the system.
2. Select DVD function.
3. Press
3. Press
button again to turn off the system.
4. Press
9
button and
button simultaneously. The sys-
tem will turn on automatically.
5. The message “COLOR PAL” or “COLOR NTSC” appears on
the fl uorescent indicator tube.
[REMOTE COMMANDER DISABLE MODE]
• This mode let you disable the remote commander reception.
• This mode let you disable the remote commander reception.
When this mode is activated, the system will not response if
the button on the remote commander is pressed. The message
“Remote Disable” appears on the fl uorescent indicator tube.
the button on the remote commander is pressed. The message
“Remote Disable” appears on the fl uorescent indicator tube.
This mode is essential for conducting test and repairing when
no interruption from the other remote commander is expected.
This mode is cancelled automatically when the AC power sup-
ply is turned off.
no interruption from the other remote commander is expected.
This mode is cancelled automatically when the AC power sup-
ply is turned off.
Procedure:
1. Press
1. Press
button to turn on the system.
2. Press
Y
button, [FLANGER] button and [DISC 2] button
simultaneousl untill“RemoteDisable” or “RemoteEnable” ap-
pears on the fl uorescent indicator tube.
pears on the fl uorescent indicator tube.
[TCM OFFLINE MODE]
• This mode is used to prevent the system from turning off au-
• This mode is used to prevent the system from turning off au-
tomatically when TCM is not connected. Therefore, measure-
ments can be done even when TCM is not connected during
production.
ments can be done even when TCM is not connected during
production.
• Procedure:
1. When the system is turned off, press [EQ BAND] button,
[TAPE A/B] button and
button simultaneously. The sys-
tem will turn on automatically.
2. The message “TCM OFFLINE” will appears on the fl uores-
cent indicator tube.
• To release from TCM Offl ine Mode, perform “COLD RESET”
or turn off the power supply.
[DVD FIRMWARE DISPLAY]
• This mode is used to display the DVD fi rmware version.
• This mode is used to display the DVD fi rmware version.
• Procedure:
1. Press
1. Press
button to turn on the system.
2. Press [DVD] button to switch to DVD function.
3. Press
3. Press
button again to turn off the system.
4. Press
Y
button and
button.
The system turns on automatically.
5. The version of DVD fi rmware appears on the TV screen.
5. The version of DVD fi rmware appears on the TV screen.
[DVD OFFLINE]
• This mode is used to enable audio output from the function
• This mode is used to enable audio output from the function
other than DVD function in order to check the audio output
from the system without connecting DVD.
from the system without connecting DVD.
This model is also used to prevent system enter protector mode
when DVD is not connected.
when DVD is not connected.
• Procedure:
1. When the system is turnd off, press
1. When the system is turnd off, press
Y
button, [FLANGER]
button and [DISC 1] button simultaneously and the message
“DVD OFFLINE” appears on the fl uorescent indicator tube.
“DVD OFFLINE” appears on the fl uorescent indicator tube.
• To release from DVD Offl ine Mode
To release from this mode, perform “COLD RESET” or turn
off the power supply.
off the power supply.
[VACS DISPLAY]
• This mode is used to check the VACS level.
• This mode is used to check the VACS level.
• Procedure:
1. Press
1. Press
button to turn on the system.
2. Press
Y
button, [SOUND FIELD] button and [DISC 2] but-
ton simultaneously.
3. The VACS Level Display, the fl uorescent indicator tube dis-
plays “VATB F APC”. “V” represent VACS , A represent
VACS level which is triggered by signal level, “T” represent
Thermal VACS NEO, B represent VACS level which is trig-
gered by temperature, “F” represent FAN is triggered by soft-
ware to turn in to high speed, “AP” represent APVACS (Abuse
VACS level which is triggered by signal level, “T” represent
Thermal VACS NEO, B represent VACS level which is trig-
gered by temperature, “F” represent FAN is triggered by soft-
ware to turn in to high speed, “AP” represent APVACS (Abuse
Click on the first or last page to see other HCD-GN1200D / MHC-GN1200D service manuals if exist.