Read Sony HCD-FR1K / HCD-FR8 / HCD-FR9 (serv.man2) Service Manual online
12
HCD-FR1/FR8/FR9
SECTION 2
ASSEMBLY
• This is can be assemble according to the following sequence.
2-1. HOW TO INSTALL THE CAM (EJECT LOCK)
2-2. HOW TO INSTALL THE CAM (GEAR)
mark
cam (BU U/D)
cam (eject lock)
– bottom view • front –
gear (eject lock)
1
Rotate the cam (BU U/D) fully in the direction of arrow.
2
Engage the gear (eject lock) and the gear of the cam (eject lock)
aligning the mark with the center of the gear (eject lock).
aligning the mark with the center of the gear (eject lock).
boss
cam (gear)
mark
cam (BU U/D)
– bottom view • front –
1
Check that the cam (BU U/D) can not be rotated in the direction of arrow.
2
Align the mark on the cam (gear) with the boss as shown in the figure
and install the cam (gear).
and install the cam (gear).
Click on the first or last page to see other HCD-FR1K / HCD-FR8 / HCD-FR9 (serv.man2) service manuals if exist.