HCD-ESX6, HCD-ESX8, HCD-ESX9 - Sony Audio Service Manual (repair manual). Page 90

1.0

2013.07

New

1.1

2013.10

Addition of African model (HCD-ESX6/ESX8).

Add C923 in SMPS-600W board.

Add CLIP, COATING in pg 68 (for 240 V AC area in E model).

Add CUSHION (B) in pg 68.

Add CUSHION (PW) in pg 12 and 69.

Add CUSHION (E 0.5) and CUSHION (H) in pg 11 and 66.

Change description of C1855, C1856, C1857, C1858, C1870, C1872, C1873, C1874 and C1875

in MB board.

Change P/N of R330, R331 and R332 in MB board.

Change Ref. No. of CLAMP, SLEEVE FERRITE ((for 240 V AC area in E model) in pg 66 and 89).

Change of SMPS-400W board (Suffi x 12) (ESX8).

Delete CN205 in PANEL board.

Delete D1855 and D1856 in MB board.

Service code changed for C1952 in MB board.

Service code changed for C212 in PANEL board.

 

 

 

 

 

 

 

 

 

 

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note: If you still see the original page, press the [Enter] key again.