Read Sony HCD-E800W Service Manual online
HCD-E800W
7
MAIN board
Connect jig (extension cable J-2501-199-A)
to the MAIN board (CN501) (Except AEP).
Connect jig (extension cable J-2501-214-A)
to the MAIN board (CN502) (AEP).
to the MAIN board (CN501) (Except AEP).
Connect jig (extension cable J-2501-214-A)
to the MAIN board (CN502) (AEP).
800
:/2 W
800
:/2 W
– POWER Board (Conductor Side) –
C903
C934
MAIN BOARD SERVICE POSITION
In checking the MAIN board, prepare jig (extension cable J-2501-199-A: 1 mm Pitch, 25 cores, Length 300 mm/J-2501-214-A: 1 mm Pitch,
27 cores, Length 300 mm).
In checking the MAIN board, prepare jig (extension cable J-2501-199-A: 1 mm Pitch, 25 cores, Length 300 mm/J-2501-214-A: 1 mm Pitch,
27 cores, Length 300 mm).
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C903 and C934) to
discharge the capacitors (C903 and C934).
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C903 and C934) to
discharge the capacitors (C903 and C934).
Click on the first or last page to see other HCD-E800W service manuals if exist.