HCD-CZ1, NAS-CZ1 - Sony Audio Service Manual (repair manual). Page 6

Read Sony HCD-CZ1 / NAS-CZ1 Service Manual online

6
HCD-CZ1/NAS-CZ1
3.2 Errors After Serve Connection
3.2.1 “Loading” is displayed for a long time
(1) When the set is connected to the M-crew Server for the first
time, the M-crew Server identifies the HCD-CZ1 individually
and creates the profile information in the personal computer,
and therefore it will take time for “Loading”
t wait for a while as it is until “loading” finishes.
(2) When the set is connected to a DLNA server other than M-
crew server, if many contents have been stored in that server,
it will take time for “loading”.
t Though “Loading” will finish after a while, it is
recommended that the music be imported with the M-
crew Server and the M-crew Server be used as a server.
3.2.2 “Server Error” is displayed
(1) If the load on personal computer is large, the communication
with the set will not finish within the specified time, resulting
in “Serve Error” Display.
t Reduce the load on personal computer, and then retry.
(2) “Server Error” will be displayed if the server information is
refreshed (addition or deletion of music) when you are listening
to the music with the set.
t Reconnect the set to the server.
3.3 Errors When You Are Listening To The Music
3.3.1 Sounds are interrupted
(1) The baud rate will be reduced in the wireless connection
t Cable connection is recommended.
(2) Check if the music itself registered to the server is interrupted.
t Certain ripping software may not be able to encode the
music-to-music joints continuously.
3.3.2 Some functions cannot be used
(1) If a server other than M-crew Server is used, the following
functions cannot be used. Following the pages 13 and 14 of
the Operating Instructions for NAS-CZ1 (refer to page 11 of
this service manual), select the M-crew Server.
-  Web Radio
-  Library Mode switching
-  Library Search
-  Favorite
-  User Profile
3.3.3 “Cannot Play” is displayed
(1) If the server does not convert the music into LPCM format for
streaming, the set cannot play that music.
t You can play the contents supported by the M-crew Server,
if the set is connected to the M-crew Server.
(2) The contents with DRM may not be processed for streaming.
t The contents with DRM are not supported.
(3) “Cannot Play” will be displayed if the contents themselves
are deleted though the music contents are registered to the
server.
3.3.4 Operation becomes slow
(1) If it takes time to communicate with the server, the operation
of the set may become slow according to that time.
Page of 70
Display

Click on the first or last page to see other HCD-CZ1 / NAS-CZ1 service manuals if exist.