Read Sony HCD-BX3 / HCD-DX3 / MHC-BX3 / MHC-DX3 Service Manual online
6
6
1
3,5
2,4
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
Inserting two size AA (R6)
batteries into the remote
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to prevent possible
damage from battery leakage.
time, remove the batteries to prevent possible
damage from battery leakage.
When carrying this system
Make sure that all discs are removed from the
unit. To protect the CD mechanism, hold
down CD and press ?/1 while the power is
on. “LOCK” appears in the display and the
power is turned off.
unit. To protect the CD mechanism, hold
down CD and press ?/1 while the power is
on. “LOCK” appears in the display and the
power is turned off.
E
e
e
E
1
Press CLOCK/TIMER SET.
The hour indication flashes.
Step 1: Hooking up the system
(continued)
(continued)
l
hH
S
s
j
J
L
H
S
s
Step 2: Setting the
time
time
You must set the time before using the timer
functions.
functions.
The clock uses a 24-hour system on the
European model, and a 12-hour system on
other models.
European model, and a 12-hour system on
other models.
The 24-hour system is used for illustration
purposes.
purposes.
7
2
3
4 1
?/1
(Power)
(Power)
continued
Shuttle
Step 3: Presetting
radio stations
radio stations
You can preset a total of 30 preset stations (20
for FM and 10 for AM).
for FM and 10 for AM).
2
Press . or > repeatedly to set
the hour.
the hour.
3
Press ENTER.
The minute indication flashes.
4
Press . or > repeatedly to set
the minute.
the minute.
5
Press ENTER.
The clock starts working.
Tip
If you make a mistake, start over from step 1.
To change the time
The previous explanation shows how to set
the time while the power is off. To change the
time while the power is on, do the following:
the time while the power is off. To change the
time while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press . or > repeatedly to select SET
2 Press . or > repeatedly to select SET
CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
4 Perform steps 2 through 5 above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
the power cord or if a power failure occurs.
This section is e
xtracted from
instr
uction man
ual.
Click on the first or last page to see other HCD-BX3 / HCD-DX3 / MHC-BX3 / MHC-DX3 service manuals if exist.