Read Sony HBD-NF7220 Service Manual online
HBD-NF7220
5
NOTE OF REPLACING THE IC3101 AND IC3102 ON
THE AMP BOARD AND THE COMPLETE AMP BOARD
When IC3101 and IC3102 on the AMP board and the complete
AMP board is replaced, it is necessary to spread the compound
between parts and heat sink.
THE AMP BOARD AND THE COMPLETE AMP BOARD
When IC3101 and IC3102 on the AMP board and the complete
AMP board is replaced, it is necessary to spread the compound
between parts and heat sink.
Part No.
Description
J-2501-221-A
THERMAL COMPOUND (G747)
Spread the compound referring to the fi gure below.
IC3102
IC3101
thermal compound G747
– AMP Board (Component Side) –
MODEL IDENTIFICATION
– Bottom side view –
Part No.
Model
Part No.
AEP
4-486-010-0[]
NOTE OF REPLACING THE IC101, IC202, IC305,
IC901, IC1001 AND IC2001 ON THE MB1305 BOARD
IC101, IC202, IC305, IC901, IC1001 and IC2001 on the MB1305
board cannot exchange with single. When these parts on the
MB1305 board are damaged, exchange the entire mounted board.
IC901, IC1001 AND IC2001 ON THE MB1305 BOARD
IC101, IC202, IC305, IC901, IC1001 and IC2001 on the MB1305
board cannot exchange with single. When these parts on the
MB1305 board are damaged, exchange the entire mounted board.
NOTE OF REPLACING THE IC2001 ON THE AUDIO
IO BOARD
IC2001 on the AUDIO IO board cannot exchange with single.
When this part on the AUDIO IO board is damaged, exchange the
entire mounted board.
IO BOARD
IC2001 on the AUDIO IO board cannot exchange with single.
When this part on the AUDIO IO board is damaged, exchange the
entire mounted board.
NOTE OF REPLACING THE IC2951 ON THE TOUCH_S
BOARD
IC2951 on the TOUCH_S board cannot exchange with single.
When this part on the TOUCH_S board is damaged, exchange the
entire mounted board.
BOARD
IC2951 on the TOUCH_S board cannot exchange with single.
When this part on the TOUCH_S board is damaged, exchange the
entire mounted board.
NOTE OF DELETING THE PRODUCT REGISTRATION
ON SEN (INTERNET VIDEO)
It is needed to delete the product registration on SEN (Internet
Video) by checking the “Device ID” which have 12 digits hexa-
decimal number. The procedure of checking “Device ID” can be
followed as below :
ON SEN (INTERNET VIDEO)
It is needed to delete the product registration on SEN (Internet
Video) by checking the “Device ID” which have 12 digits hexa-
decimal number. The procedure of checking “Device ID” can be
followed as below :
1. Press [HOME] key of the remote commander, the message
“HOME” appears on main unit.
2.
Press [<] key of the remote commander and select “Setup”.
3.
Press
[M]/[m] key of the remote commander, select “System
Settings” and press [ ] key.
4.
Press
[M]/[m] key of the remote commander, select “System
Information” and press [ ] key.
5. Device ID will shown on the display.
Device ID : XX:XX:XX:XX:XX:XX (12 digits hexadecimal
number).
If it is needed to delete the customer’s registration, please contact
the Service Headquarter with Device ID information.
the Service Headquarter with Device ID information.
NOTE OF REPLACING THE IC102, IC103 AND IC202
ON THE MB1305 BOARD
Replacement of IC102, IC103 and IC202 on the MB1305 board
used in this unit requires a special tools.
ON THE MB1305 BOARD
Replacement of IC102, IC103 and IC202 on the MB1305 board
used in this unit requires a special tools.
Click on the first or last page to see other HBD-NF7220 service manuals if exist.